| From | Message |
Kyle
Unregistered
5/02/2001
19:26:39
|
 Subject: Test Pipe or High Flow Cat
IP: Logged
Message:
I was looking for either a high flow cat or test pipe for a 3.9L. I haven't been able to find anything on the internet. Does anyone knoe where I can find either?
|
rthomas
Dodge Dakota
7/07/2001
11:01:44
|  RE: Test Pipe or High Flow Cat
IP: Logged
Message:
just take it out duh
|
4X4Tony
Dodge Dakota
7/09/2001
08:01:58
| RE: Test Pipe or High Flow Cat
IP: Logged
Message:
Dunno what year Dak you have, but if you have an O2 sensor after the cat than you just can't "take it out."
Take a look at http://stores.yahoo.com/exhaustpros/carunconwita.html (you'd want the 2.5" IN/OUT - 94004). I just put one on my 99 5.2. Sweet.
|
Bernd
Gen III
7/09/2001
09:11:35
| RE: Test Pipe or High Flow Cat
IP: Logged
Message:
High-Flow Cat: CarSound P/N# 94006 (2.5" IN/OUT)
I've removed the cat on my '97 as a test and found no HP increase on the Dyno...I did, however, find that more people were looking at me due to the obnoxiously loud exhaust tone (without the cat). I replaced the test-pipe with the CarSound and it's louder than the stock cat but not as obnoxious under WOT as without the cat.
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
4X4Tony
Dodge Dakota
7/09/2001
09:35:48
| RE: Test Pipe or High Flow Cat
IP: Logged
Message:
Oh man, I screwed up - 94006 is the part number. 94004 is the 2" IN/OUT.
Sorry.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
