| From | Message |
Anthony G
Dodge Dakota
JOIN HERE
12/30/2002
11:43:32
|
 Subject: Roller Lifters
IP: Logged
Message:
Does anyone make better roller lifters for the 5.9L Magnum engine other than Mopar? If so where?
Tks!
|
Anthony G
Dodge Dakota
JOIN HERE
12/30/2002
11:49:31
| RE: Roller Lifters
IP: Logged
Message:
Wow, Crower has some for $321! Vs Mopar $110.
That seem way too high, but the Mopar lifter are crap, always tick and dont seem to pump up well.
|
rtdkota
R/T
 
12/30/2002
19:05:19
| RE: Roller Lifters
IP: Logged
Message:
I've sell the roller lifters from Crower for $272... They are a similar design to the mopar, but do have a different oil hole (it's at about a 40 degree angle downward to the lifter bore vs. straight out on the stockers). I've sold a bunch of these, and will be running a set myself once I get my 2bbl M1.
Sam
RTDKOTA
|
Anthony G
Dodge Dakota
JOIN HERE
12/31/2002
09:20:52
| RE: Roller Lifters
IP: Logged
Message:
I'll think about it, tks for the heads up. So how to the internals compare to the Mopar ones? Can they handle a heavier load. I not quite sure how much extra stress my R/T heads with it's springs and high lift cam are pushing. Stock 180-190lbs? Now 230lbs?
|
rtdkota
R/T
12/31/2002
11:06:47
| RE: Roller Lifters
IP: Logged
Message:
They are supposedly beefier-- I've sold a bunch to guys reving past 6k, and all have said they are working great compared to the mopar stockers they were using (both lifters with miles upon miles on them, and new ones out of the box). I have been told by some they are identical to Mopar-- but I don't think so-- I'm posting a scan on my website right now of the Crowers. www.socaldakota.com/VIDEOS/Crower1.jpg, Crower2.jpg
Sam
RTDKOTA
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
