| From | Message |
ZZX1100
Dodge Dakota
JOIN HERE
12/20/2002
16:07:43
|
 Subject: Roller Rocker
IP: Logged
Message:
did a search lookin at past posts on roller rockers i noticed rtkota and others saying that crower kit came with longer pushrods...
so i compared the pushrods that came with my mopar 1.7 kit and i found that the stock pushrods on my 5.9 were about 1/4 inch longer than the ones that came with the mopar performance 1.7 kit??
anyone know why is that and should i get longer pushrods...
|
Anthony G
Dodge Dakota
JOIN HERE
12/20/2002
17:16:23
| RE: Roller Rocker
IP: Logged
Message:
Mopar Roller Rockers require smaller pushrods due to the increase rocker size and to keep the correct angle or pitch.
|
rtdkota
R/T
 
12/20/2002
20:44:16
| RE: Roller Rocker
IP: Logged
Message:
YUP-- you got it...
Crower can use stock pushrods, or if you rev past 5500 rpm, .050" longer or 6.950" stockers are 6.900"
Always make sure you match parts (rockers, studs, pushrods) with your application!
Sam
RTDKOTA
|
ZZX1100
Dodge Dakota
JOIN HERE
12/21/2002
11:12:52
| RE: Roller Rocker
IP: Logged
Message:
cool thanx
my god they are nice i had this tic tic tic tic on my 5.9 from day one with the stock rockers now it sounds healthy and sweet.. my first impression is the truck is waaaaaay smother and quieter
tip to all you gear heads is let idle for a minute then adjust lash then let idle again then adjust one more time and lock... with valve cover off there is no oil splatter at all
|
Ryan33
Dodge Dakota
JOIN HERE
12/31/2002
18:06:28
| RE: Roller Rocker
IP: Logged
Message:
Hey rtdkota, I just bought a set of crower rockers for me 2000 v6. Do I need the studs that come with the kit?? I didnt purchase the kit just the rockers becuase I am not going to even rev over 5000rpm???
|
rtdkota
R/T
12/31/2002
18:43:03
| RE: Roller Rocker
IP: Logged
Message:
You got the rockers, and no STUDS??? UH.. you need the studs to mount the rockers--- You kinda like bought wheels and tires with no lug nuts-- you gotta have them.
Did you order this from me?!?!
RTDKOTA
|
Ryan33
Dodge Dakota
JOIN HERE
12/31/2002
19:32:22
| RE: Roller Rocker
IP: Logged
Message:
Ya i think so. I ordered it from socaldakota.com
|
rtdkota
R/T
12/31/2002
20:00:54
| RE: Roller Rocker
IP: Logged
Message:
That's me-- give me a call-- should have come with studs! 619-274-1292
Sam
RTDKOTA
|
rtdkota
R/T
12/31/2002
21:02:59
| RE: Roller Rocker
IP: Logged
Message:
If ryan is ryan from CALI.. you are getting the standard kit, no pushrods, no guideplates-- it comes with the studs, don't worry! Whew!
Sam
RTDKOTA
|
Ryan33
Dodge Dakota
JOIN HERE
12/31/2002
21:11:38
| RE: Roller Rocker
IP: Logged
Message:
LOL oh, hehe you should put that on your site!! Hehe thanks man :)
|
rtdkota
R/T
12/31/2002
21:18:21
| RE: Roller Rocker
IP: Logged
Message:
I see that now... thanks!
Sam
RTDKOTA
|
91DakotaFreak
Dodge Dakota
JOIN HERE
1/01/2003
01:07:00
| RE: Roller Rocker
IP: Logged
Message:
who sells crower rockers here on the site??? If anyone knows do they make a set for a 91 318 pre mag I have been thinking about going with a set of roller rockers and a cam change but am not sure what i would be getting myself into etc. Thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
