| From | Message |
dokblues
Dodge Dakota
JOIN HERE
12/14/2002
23:01:02
|
 Subject: dakota intake
IP: Logged
Message:
I have checked out this site extensively. I think if you want to make an intake system it,s easy!
Just order from your auto parts a 3" stainless
u-bend about $17-$25 dollars. Cut pipe to make 90
degree bend. clean up inside & out with grinder.
Go to Checker Or Auto Zone & purchase 7" cone fitler K&N OR other aftermarket $20-$55 dollars.
Bolt this all together and Voila!! Cold air intake for 3.9,5.2 or 5.9 on the cheap.This all bolts to the existing air hat and intake tube assy. I also placed this inside the lower half of the stock air box so that it is protected somewhat from any splash or road gue!!!
|
John Milner
Dodge Dakota
JOIN HERE
12/14/2002
23:36:53
|  RE: dakota intake
IP: Logged
Message:
4.7!!! Not the v-6 or 318/360. You still have to make a clean fitting for the case vent. Any muffler shop can bend 3" aluminized for 10 bucks, but will it do as good as an engineered intake?
|
4.7dakman
Dodge Dakota
JOIN HERE
12/15/2002
00:10:03
| RE: dakota intake
IP: Logged
Message:
nitroussteve's intake,4.7L!
i was impressed.enough said!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
