| From | Message |
pbxr
GenIII
12/09/2002
13:14:12
|
 Subject: Taylor Wires
IP: Logged
Message:
Can I use Taylor 8mm Spiro wires with 90 degree boots, is that possible? Would I have to tak ethe heat shields off in order to get these wires to work? thanks for the input.
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
afi360
*R/T*
12/09/2002
14:23:43
| RE: Taylor Wires
IP: Logged
Message:
you can use 90 degree boots, but why would you?? you will have to remove the individual heat risers that shield the plug/boot from the manifolds, and that will shorten the life of your wires and stuff...just stick with the straight ones would be my advice...LEARN FROM MY MISTAKE!!! make sure you pull on the boot itself when removing the wires..i pulled the taylor wire right out of the boot :(
**in shadows growing wings**
|
dak
Dodge Dakota
JOIN HERE
12/09/2002
14:26:33
| RE: Taylor Wires
IP: Logged
Message:
only one end of the wire has a 90 degree boot. the other end is straight. the 90 degree end goes on the distributor. and the straight end goes to the plugs. I took the heat shields off anyways, makes things simpler.
|
pbxr
GenIII
12/10/2002
06:46:20
| RE: Taylor Wires
IP: Logged
Message:
Actually this set, for a V8 non specific vehicle, has 90 degree boots on both ends. A buddy of mine gave thest to me as a gift, and I wouldn't mind upgrading the wires. Let me ask you guys this, does Taylor sell straight boots alone without the wires, if so where the best deal goin right now.
Thanks again
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
Nitro Junkie
R/T
12/10/2002
16:21:58
| RE: Taylor Wires
IP: Logged
Message:
I have the Taylor Spiro-Pros on my R/T. You have to take the heat sheilds off with the custom set also. They have a thicker boot than the stock wires so heat isnt a problem i have had them on for over a year and no problems ! I think you can use the 90 degree boots just fine.
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor, 180 T-Stat
Turbo City Dual Tube Air Intake w/ Twin 5" Round K&N Filters
Speed Scene Grill (Upper&Lower)
|
DAK
Dodge Dakota
JOIN HERE
12/10/2002
23:34:10
| RE: Taylor Wires
IP: Logged
Message:
I AGREE WITH JUNKIE. THE TEMP RATING ON THE WIRES/BOOT CAN HANDLE THE HEAT JUST FINE.
|
pbxr
GenIII
12/11/2002
07:29:31
| RE: Taylor Wires
IP: Logged
Message:
thanks for the info guys, although it sounds like I can get away with it, I found some 180 degree boot @ truckperformance.com made for the tayler wires. The only thing slowing me up now is, the mail, hehe. thanks againfor the info
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
