| From | Message |
Harrison
Dodge Dakota
JOIN HERE
11/15/2002
07:52:40
|
 Subject: M1 Manifold
IP: Logged
Message:
I am getting the B&G Flash this week. I just installed my new M1 Intake Manifold. Do I need any other mod's inorder to get the flash or am I ready to go?
THX!
|
Snowman
GenIII
11/15/2002
12:22:35
|  RE: M1 Manifold
IP: Logged
Message:
how lon did the M-1 take you to install?
Formerly Cadetdak
"This war will end at a time and place of our choosing"
president Bush
|
b1llyw
DakotaEnthusiast
11/15/2002
12:34:24
| RE: M1 Manifold
IP: Logged
Message:
You definitely want to install a 180' thermostat if you haven't already. You are going to need to run cooler with all the advance the flash will add. I would also run a tank of 93 octane through before you even have the flash done. If you have much 87 in your tank, you'll ping.
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 9.25, 1995 Dakota CC, 4x2, SLT, 318, 5 spd, 3.55 8.25
|
R/Truck
Dodge Dakota
JOIN HERE
11/15/2002
12:47:38
| RE: M1 Manifold
IP: Logged
Message:
You will also need some one step colder plugs (autolite 3923 or NGK ZFR6F-11).
and headers will complete package nicely.
|
Will
Dodge Dakota
JOIN HERE
11/16/2002
12:03:12
| RE: M1 Manifold
IP: Logged
Message:
Snow,,,
It took me between 4 to 5 hours to install my M-1. It's not that hard to do. Just drain some coolant out first so it will not poor into the motor.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
