From | Message |
phatdak02 Dodge Dakota JOIN HERE
10/09/2002 21:00:20
|
Subject: R/T Heads IP: Logged
Message: This might be a dumb question, but I see alot of posts about RT heads. I was just wondering if there is a difference between those and the stock heads that come on an RT. I see the ones on KRC performance, but I always thought they were just ported and polished stock RT heads.
|
POWER HUNGRY Dodge Dakota JOIN HERE
10/09/2002 22:35:29
| RE: R/T Heads IP: Logged
Message: The R/T's stockers and the R/T heads are not the same head. The R/T heads have ports that are 20% larger. The stock heads on the 360 are the same ones on the 318.
|
EyeTrip R/T
10/10/2002 12:39:37
| RE: R/T Heads IP: Logged
Message: Is there any way to tell if you have R/T heads? I bought this truck used and already had some mods done to it.
I noticed the "R/T" raised casting on the heads. But still not convinced.
|
Anthony G Dodge Dakota JOIN HERE
10/10/2002 12:51:05
| RE: R/T Heads IP: Logged
Message: You could always pull a valve cover off and check the valve springs. You'll see another set inside the normal outter spring. I would doubt they would of kept the stock springs if they took the time to replace the heads with R/T heads. Also the pushrod holes only have holes vs a big gaping t square opening on the normal stock heads.
|
alex Dodge Dakota JOIN HERE
10/10/2002 13:36:57
| RE: R/T Heads IP: Logged
Message: I think the raised R/T is only on the aftermarket R/T heads. I dont' think those come on the factory heads.
|
Anthony G Dodge Dakota JOIN HERE
10/10/2002 14:14:38
| RE: R/T Heads IP: Logged
Message: http://members.cox.net/fastdodge/big1207.jpg
You can check out how my R/T heads look. I added this big picture so you could see it better, I have more pics using the normal site page.
http://members.cox.net/fastdodge
|
phatdak02 Dodge Dakota JOIN HERE
10/10/2002 17:57:59
| RE: R/T Heads IP: Logged
Message: Yeah, I was wondering about the raised R/T letters too.
|
EyeTrip R/T
10/10/2002 19:07:42
| RE: R/T Heads IP: Logged
Message: Anthony G thanks for the pic's. I still am not sure.
|
HSKR Dodge Dakota JOIN HERE
10/10/2002 19:46:16
| RE: R/T Heads IP: Logged
Message: The stock R/T heads do not have the raised R/T letters on them. They are the exact same heads that come with the Ram with the 5.9, and Durango. Nothing special about the R/T engine other than big engine little truck. The aftermarket R/T heads have the raised letters on them.
|
EyeTrip R/T
10/10/2002 23:30:40
| RE: R/T Heads IP: Logged
Message: HSKR Damnit man THANKS! That makes me one happy man. I have the R/T raised stamp on the heads. I think it's time for some porting-polishing and a cam.
|
R/T Superbee Dodge Dakota JOIN HERE
11/29/2002 21:17:22
| RE: R/T Heads IP: Logged
Message: Who makes the best heads for an R/T? I checked with the dodge dealer today and they said their aluminum heads #P4876624 where the best but $1,400 plus $174 for studs, ouch.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|