| From | Message |
slow2dak
Dodge Dakota
JOIN HERE
10/03/2002
22:45:25
|
 Subject: pre-cat removal
IP: Logged
Message:
does anyone remember seeing the post for removal of the precats on a 2002 4.7 dak without buying hte o2 simms. i cant seem to find it
mike
02 4.7 RC 3.55 one legged wonder
relocated iat, removed 3rd cat, cut up factory y-pipe and turned it into homemade 3" with 40 series flowmaster, adjustable coolant temp sensor, tps .71v, soon to come, clutch fan removal, ho cams and 3.91 gears and a sure grip
|
Neil
Dodge Dakota
JOIN HERE
10/07/2002
11:32:25
|  RE: pre-cat removal
IP: Logged
Message:
You can get O2 sims from Fastman http://www.thefastman.com/thefastman/
|
Art
Dodge Dakota
JOIN HERE
10/07/2002
12:08:12
| RE: pre-cat removal
IP: Logged
Message:
The guy that made them was Conig,here`s a post I had saved,never got around to emailing the guy but it was him that made it,
https://www.dodgedakota.net/boards/v8/1083.html
|
mopar15
Dodge Dakota
JOIN HERE
10/07/2002
19:33:24
|  RE: pre-cat removal
IP: Logged
Message:
where is the 3rd cat?
|
D
GenIII
10/07/2002
19:36:38
| RE: pre-cat removal
IP: Logged
Message:
after the Y-pipe, before the muffler.
2001 4.7 CC auto
Painted Porsche black
shaved door handles & tailgate
welded Sir Michaels roll pan
DJM drop 3/6
airaid intake
180 stat, ported-polished TB
Dynomax 3" catback, carsound cat
HO cams/manifold, 3.92's and sure grip LS collecting dust!
|
mopar15
Dodge Dakota
JOIN HERE
10/07/2002
19:41:34
| RE: pre-cat removal
IP: Logged
Message:
thanks Genlll.
Did you buy a kit for the shaved handles, or did you have to get the cut-outs custom fit?
|
slow2dak
Dodge Dakota
JOIN HERE
10/07/2002
20:00:41
| RE: pre-cat removal
IP: Logged
Message:
hey thanks for tha help. ive been looking forever for that post about the wiring on tha o2 sensors. ur a life saver ART. thanks bro
'02 4.7 RC 3.55 one-legged wonder, home made y-pipe. removed 3rd cat, full 3" from y-pipe with 2 chamber flowmaster, relocated iat, adjustable coolant temp sensor, k & N drop in, removed rubber flap, unplugged line pressure sensor(helped alot)
|
mopar15
Dodge Dakota
JOIN HERE
10/08/2002
22:01:17
| RE: pre-cat removal
IP: Logged
Message:
hey slow2dak, can you tel me how to unplug the line pressure sensor, and how much better is it?
|
slow2dak
Dodge Dakota
JOIN HERE
10/09/2002
13:59:56
| RE: pre-cat removal
IP: Logged
Message:
if you have a 45rfe, the line pressure sensor is on the passenger side of the trans right before the tailshaft housing. just unsnap the red safety clip and waa-laa. its unplugged and the is no MIL. my truck is a 4.7 RC sport, 3.55 peg leg,and when i unplugged it it will break em loose in between 1st and 2nd now. its not gonna give you a neck smapping experience but it helped me so it may for u.
|
mopar15
Dodge Dakota
JOIN HERE
10/14/2002
14:46:02
| RE: pre-cat removal
IP: Logged
Message:
hey slow2dak,
just unplug the red clip? thats it? I dont have to unplug the whole module?
|
slow2dak
Dodge Dakota
JOIN HERE
10/14/2002
20:06:53
| RE: pre-cat removal
IP: Logged
Message:
the red clip on the connector is a safety so the whole thing doesnt come unplugged. slide the red clip outwards and then push in on the connectors release button and waa-laa. out it comes.
mike
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
