| From | Message |
MikeD
*R/T*
9/30/2002
12:20:49
|
 Subject: 2nd Dyno
IP: Logged
Message:
Well I took my truck in Sat. for another pull since I had my 2.02 heads installed.
1st pull...
282rwhp...he said I was running super lean (obviously since I had the heads changed) He asked if I had any way to richen it up, good thing I had the IAT box hooked up. So I cranked it to the 2nd from coldest mark. Then adjusted the TV cable a tad.
2nd pull...
309rwhp
3rd pull...
307rwhp
I gained 25-27hp just from turning on the IAT adjuster and pulling the TV Cable out a bit, I was shocked the IAT helped that much.
The 24# injectors are on the way to fix the leaning out problem.
Just thought everyone might like to know how much the IAT box helps.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
xplikt
GenIII
9/30/2002
12:24:58
| RE: 2nd Dyno
IP: Logged
Message:
Awsome, too bad mine is still on fuking backorder.
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
Demon Dakota
DakotaEnthusiast
9/30/2002
12:37:53
| RE: 2nd Dyno
IP: Logged
Message:
Why don't you just make your own box for like $30 (US). It does the same dang thing. Radio Shack has all the goodies in stock for the most part.
|
Canucker
Dodge Dakota
JOIN HERE
9/30/2002
12:39:11
| RE: 2nd Dyno
IP: Logged
Message:
those are some real nice numbers Mike!
|
DaveR
GenII
9/30/2002
17:29:11
| RE: 2nd Dyno
IP: Logged
Message:
They are really easy to make. Maybe 2 hours work in all.
|
BlkDak
Dodge Dakota
JOIN HERE
9/30/2002
17:36:08
| RE: 2nd Dyno
IP: Logged
Message:
Whats an IAT box ?
|
FlameRed01
Dodge Dakota
JOIN HERE
9/30/2002
17:38:41
| RE: 2nd Dyno
IP: Logged
Message:
very impresive MikeD.
here we go again lol
|
moxley
Dodge Dakota
JOIN HERE
9/30/2002
18:17:17
| RE: 2nd Dyno
IP: Logged
Message:
Good #'s Mike, Now lets see some 13.sec time slips!!
Mike
Cad Tech. <----- Just for you Mikey!
|
2THEXTRM
GenIII
10/01/2002
08:38:03
| RE: 2nd Dyno
IP: Logged
Message:
Anyone have the schematic for making the IAT adjuster? I'll buy the parts today and make one, just won't have the pretty case like Speedtweaks. Maybe I'll drill a hole in a convenient spot in dash for the potentiometer knob to stick through and just vinyl label around the knob to look factory:)
Flowmaster cat back, Air Raid w/homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 305 70-16 X-Terrains on AR Terons
|
rtdkota
R/T
10/01/2002
10:34:48
| RE: 2nd Dyno
IP: Logged
Message:
Hey-- more info please--- :)
What RPM, how was the curve?? Torque?? Peak? Curve???
I want to dyno mine with the 100 NX shot now... 12.8 was a blast!
Good numbers BTW-- Expected with the 2.02s... Curious to see where it peaks.
Sam
RTDKOTA
|
MikeD
*R/T*
10/01/2002
11:11:16
| RE: 2nd Dyno
IP: Logged
Message:
They dyno stops the calcs at 5800rpm...nice smooth curve (except for the air/fuel ratio...it was really lean, they said I need bigger injectors soon)...Max Torque 317rw....Peaked out at about 5400-5500 started to curve down at 5600.
After I get the cobra 24# injectors I feel I'll be running alot better.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
