| From | Message |
Jake
Dodge Dakota
JOIN HERE
9/16/2002
18:32:34
|
 Subject: Help me please
IP: Logged
Message:
I just degreased my engine, and I think that caused the problems in my truck. After I degreased it(a few days after), I noticed that my ABS and BRAKE lights were on simultaneously. Shortly thereafter, another few days, my truck would stall out while I was driving( I have a manual 3.9). This only happens after I have my RPMs at around 3000 or so. After I put in the clutch, the RPMs plummet to 500, waver, and go to 0. When I drive slowly and shift at 2000 or 2500 RPMs, this doesn't happen. What's going on?
|
DAKOTAKIDD
Dodge Dakota
JOIN HERE
9/16/2002
18:52:24
|  RE: Help me please
IP: Logged
Message:
Try getting some electro-flash contact cleaner and spray it on your pcm electrical connections and anywhere else electrical that water seeped into..reset your pcm and try it again.
C..
|
Dakaty
GenIII
9/16/2002
20:14:15
| RE: Help me please
IP: Logged
Message:
Check under your distributor cap for any signs of moisture.
Dry it out real good. (Might be a good time to replace it with one with brass contacts.)
|
Jake
Dodge Dakota
JOIN HERE
9/17/2002
14:59:18
| RE: Help me please
IP: Logged
Message:
Thanks for your help. It stalled again today, so I'll try doing what you suggested.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
