| From | Message |
blakdak01
Dodge Dakota
JOIN HERE
9/12/2002
19:04:13
|
 Subject: help with mods
IP: Logged
Message:
ok so this weekend i plan on making my own intake, installing 3923 autolites, and 180 thermo stat. i need a little help on what im suppose to get to make the intake. i know i need a filter, but what part number, and will PVC pipe work fine or could it melt? is there anything else i need to get? thanks
Http://www.streetsourcemag.com/Profile.asp?profileid=9795
|
kota on 20s
GenIII
9/13/2002
01:59:06
| RE: help with mods
IP: Logged
Message:
pvc pipe should work fine, and just get any cone filter.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
Canucker
Dodge Dakota
JOIN HERE
9/13/2002
11:53:13
| RE: help with mods
IP: Logged
Message:
I used K&N P/N RE-0920 if that helps. It has a 3.5" ID so it slides right over the OD of 3" pipe.
|
blakdak01
Dodge Dakota
JOIN HERE
9/14/2002
03:23:55
| RE: help with mods
IP: Logged
Message:
so i got a 180 t stat today but it wasnt the robert shaw, it was the superstat by Stant, the guys there told me this was the one i should get. does anyone know if this will work fine or should i really get the robert shaw??
|
kota on 20s
GenIII
9/14/2002
03:27:25
| RE: help with mods
IP: Logged
Message:
dosent really matter. just make sure it has a safe guard on it, so if it fails, it will not over heat the engine.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
