| From | Message |
jag
Unregistered
4/19/2001
18:15:48
|
 Subject: Help IAC valva problems
IP: Logged
Message:
I replaced the IAC valve on my 93 3.9 and now the damn thing won't start it turns over but won't fire.
|
RonW
*GenIII*
4/19/2001
18:32:13
| RE: Help IAC valva problems
IP: Logged
Message:
Did you reset the PCM? Resetting of the PCM causes the PCM to reset the IAC, otherwise, no idle. Also, hopefully, you didn't twist the pintle on the new IAC or you'll be back at the dealer to buy another one.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
|
Bernd
GenIII
4/19/2001
18:35:21
| RE: Help IAC valva problems
IP: Logged
Message:
A new IAC solenoid normally comes with the plunger depressed. Once the initial start-up is performed, the IAC solenoid will extend the plunger to fit.
Remove the IAC and check to see if it's extended. If not, it may be bad.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
