| From | Message |
Eazy
Dodge Dakota
JOIN HERE
8/20/2002
10:58:32
|
 Subject: S-Bolt
IP: Logged
Message:
I looked at the S-Bolt instructions but I dont understand how you bent the rod? Also what is it exactly used for? I think it is for the throttle body to hold the hat on, but im not sure. Is this instead of the large plate on the bottom of the stock rod?
Thanks!!!
|
Jesse T.
Dodge Dakota
JOIN HERE
8/20/2002
13:41:41
|  RE: S-Bolt
IP: Logged
Message:
Yes it is so that you dont have to have that plate there, they say that it resticts the flow.
Jesse T.
|
Dakota39M
Dodge Dakota
JOIN HERE
8/20/2002
14:53:19
| RE: S-Bolt
IP: Logged
Message:
I bent mine in a vise on my work bench. If you don't have one, you can use a couple pair of vise grips or pliers, it just won't look as nice. But then again, no one will see it inder the airhat either.
|
FazDak
GenII
8/20/2002
19:13:18
| RE: S-Bolt
IP: Logged
Message:
Use 2 nuts back to back on the threaded rod at the point that needs to be bent, put the vise or vise grips on the nuts not on the threads.
Good luck
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
