| From | Message |
derek j.
Dodge Dakota
JOIN HERE
8/12/2002
00:08:16
|
 Subject: gen 2 questions
IP: Logged
Message:
1: will the rotors off a gen 1 (5-4.5" bolt pattern) fit on gen 2 spindles?
2: will a 727 torqueflite auto fit in a gen 2 behind a pre mag 360?
3: what cars had the 8 3/4" rear housings that had the spring perchs the same as the gen 2
4:will a small block 27 bolt to a magnum 360 block
these are all for a 4x2 short box, thanks for the help.
|
FazDak
GenII
8/12/2002
15:58:44
|  RE: gen 2 questions
IP: Logged
Message:
#1=yes
#2=yes with work.
#3=A bodys, 65-71 but they also have a 5 on 4" bolt pattern, you'll need new axles or drill the flanges for 4.5"
#4=I may be stupid here but I have no freegin clue what you askin.
I have a 94 with a 3.9 modded, I just got finished putting a 70 Cuda 8 3/4 in, which I recomend using over the A body. With the A body 8 3/4 you will have almost no backspacing.
The only difference between the A, B and E body rears is the E and B's need new spring pearches welded on and seeing as how you will be welding on any 8 3/4 to put lower shock mounts on it its no real biggie.
Hope this helped, email me if you would like more info or picts.
Scott
|
FazDak
GenII
8/12/2002
16:03:54
| RE: gen 2 questions
IP: Logged
Message:
I just reread you post and if you meant to say "727" and not "27" than #4=yes, with the proper externally ballanced converter.
Scott
|
diligentdave
GenII
8/13/2002
13:19:14
| RE: gen 2 questions
IP: Logged
Message:
Just wanted to be the second opinion. Everything Scott said is 100% correct. Buildin' a drag truck huh? More power to ya, genII is the way to go for it.
'95 Sport 2.5L 5 Speed
Custom air intake, gutted cat, Flow 40 dumped, 2/3 drop
11.792 @ 55.9 mph in the 1/8
|
derek j.
Dodge Dakota
JOIN HERE
8/14/2002
07:09:31
|  RE: gen 2 questions
IP: Logged
Message:
yes FazDak i can't believe i didn't notice that yes i did mean to say 727 thanks for the info. oh while i am thinking about it. does anyone make long tube headers for the gen2 according to hooker the they make long tube for gen1 but not gen2, was there significant body/frame changes to not use those headers on a gen2?
i asked about both engines because i am not sure i will go with the 402 stroker crate or build my own 408 stroker. thanks again
|
94 Dak
Dodge Dakota
JOIN HERE
1/09/2012
14:17:52
| RE: gen 2 questions
IP: Logged
Message:
there were differences im not sure what but i know
there were... JBA makes headers for the gen II's
they are the only one i can find claim both long and
short also summit i believe has them
|
94 Dak
Dodge Dakota
JOIN HERE
1/09/2012
14:19:15
| RE: gen 2 questions
IP: Logged
Message:
haha was reading around and didnt realize it was 10
years old when posted.. i feel like a dumbass
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
