| From | Message |
D
Dodge Dakota
JOIN HERE
8/07/2002
00:39:51
|
 Subject: calculating 1/4 mile times?
IP: Logged
Message:
my best in the 1/8th is 9.87, if I multiply by
1.56, that tells me I am in the 15.3 sec range?
does this sound right? or is there a better way
to calculate? I just want to know approx what I
will run in the 1/4
D
01/CC/4.7/mods/DJMdrop3-6
|
IntenseDak39
*GenIII*
8/07/2002
09:30:57
| RE: calculating 1/4 mile times?
IP: Logged
Message:
i have been told that you only times it by 1.5
intensedak3.9
|
big_torque
Dodge Dakota
JOIN HERE
8/07/2002
16:02:24
| RE: calculating 1/4 mile times?
IP: Logged
Message:
I use this : http://www.rx7.org/Robinette/et.htm
use the WHEEL HP
make sure you know your weight too.
I had a dyno , and went to the track and weighed my truck. I had to lower my weight on the calculator a bit to get the right #s .... so it seems pretty accurate to me
|
R/Truck
Dodge Dakota
JOIN HERE
8/07/2002
16:23:11
| RE: calculating 1/4 mile times?
IP: Logged
Message:
Compare it with my 1/8 times (1/4 mile track)
1/8 vs 1/4
9.306 = 14.462
9.43 = 14.713
9.795 = 15.118
9.88 = 15.223 @ 92.16 *look familier*
So I would say your calculation is close.
|
D
Dodge Dakota
JOIN HERE
8/07/2002
18:53:34
| RE: calculating 1/4 mile times?
IP: Logged
Message:
thanx R/Truck. I need to get my gears and posi
installed before I go.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
