| From | Message |
Justin
Dodge Dakota
JOIN HERE
7/31/2002
11:44:14
|
 Subject: 4.7 Homebrew Intake
IP: Logged
Message:
If Anyone has made a homebrew intake for there 4.7 id really like to know what they used and instructions. Pics would help. Thx
|
Bruce P.
Dodge Dakota
JOIN HERE
7/31/2002
21:28:05
|  RE: 4.7 Homebrew Intake
IP: Logged
Message:
Here is my links page... some of the links are 'broken' but there are several examples of 'homebrew' intakes.
http://hometown.aol.com/peebs4u2/linx.html
|
Clevite 77
Dodge Dakota
JOIN HERE
8/01/2002
01:57:22
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
here's the one I followed. I used pvc though. Not melting or warping yet. this one gives you all the part numbers needed, and with pcs it's very helpfull
cold air site
pics of my cold air
|
Anthony
Dodge Dakota
JOIN HERE
8/01/2002
14:18:43
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
Here's my K&N intake with heat shield.
Anthony,
www.geocities.com/intense79/
|
GMAN
Dodge Dakota
JOIN HERE
8/01/2002
17:05:51
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
The easiest intake is as follows. Take a cone/oval filter and place it directly on the throttle body with a clamp. There are no sensors before the throttle body so you wont have any problem. Wait until you feel the throttle responce. Have fun.
|
kennungesser
Gen III
8/01/2002
18:34:43
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
What about the heat , GMAN? Has this been done with the 4.7?
Kenneth l Nungesser
|
GMAN
Dodge Dakota
JOIN HERE
8/02/2002
14:53:28
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
Yes. I did it to mine. I had the airaid system and I took that filter and put it in the throttle and you can really feel the difference.
|
Justin
Dodge Dakota
JOIN HERE
8/03/2002
11:04:20
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
i have the airaide to but my only question is if you just stick a cone on the TB were do u plug in the crank case breather i think its called. (that small black hose that plugs into the airaide??
|
Anthony
Dodge Dakota
JOIN HERE
8/03/2002
13:11:29
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
You would need to buy a crankcase breather filter. K&N sells them.
Anthony
www.geocities.com/dak2nv/
|
Clevite 77
Dodge Dakota
JOIN HERE
8/03/2002
17:05:52
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
go to this site, they have the breather info, I might have to give that oval filter trick a try
Click on this for breather info
|
Rrrockhound
GenIII
8/03/2002
20:11:39
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
Anthony,
How did you get the high gloss on the pipes?
|
Anthony
Dodge Dakota
JOIN HERE
8/03/2002
21:30:06
| RE: 4.7 Homebrew Intake
IP: Logged
Message:
I painted the pipes with a high temp spray paint, that is used for engine blocks. It's also self priming and heat resistances.
Anthony,
www.geocities.com/dak2nv/
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
