| From | Message |
Anthony G
Dodge Dakota
JOIN HERE
7/12/2002
17:20:46
|
 Subject: Will I need to Head Bolts?
IP: Logged
Message:
I just ordered 2.02 R/T heads, KRC210 CAM, Lifters, and gaskets for my R/T.
Will I be able to used my old head bolts? Should I buy some ARP head stud bolts? Any suggestions?
Thanks.
|
handi2
GenIII
7/12/2002
23:08:08
|  RE: Will I need to Head Bolts?
IP: Logged
Message:
Allways use new head bolts.
http://photos.yahoo.com/handi254310
2002 Quad Cab SLT Plus 4.7 Every Available Option
Access Tonnoue Cover/Bedrug/360 Air Intakez/Jet Stage 2
180 Robertshaw/Roadmaster Active Suspension
Street Scene Grill Inserts
|
dudesicle
Dodge Dakota
JOIN HERE
7/13/2002
00:29:58
| RE: Will I need to Head Bolts?
IP: Logged
Message:
You gotta have the M1 intake with that too. That sucker will breathe deep then.
Expect to wait about 8 weeks + for those heads.
Been many complaints about the wait for those heads from KRC
|
EyeTrip
R/T
7/14/2002
15:29:10
| RE: Will I need to Head Bolts?
IP: Logged
Message:
It's a good idea to replace your head bolts. Although, I have reused old bolts with out any problems.
HomePage
|
Anthony G
Dodge Dakota
JOIN HERE
7/15/2002
09:23:32
| RE: Will I need to Head Bolts?
IP: Logged
Message:
KRC has ARP head stud bolts for $120. Seem somewhat pricy for bolts. Does anyone know how much Mopar or normal heads bolts cost and any suggestion on where to purchase them. Thx.
dudesicle,
I been running with this setup, K&N FIPK2,F&B 50MM TB, M1 2bbl, 1.7RR, Gibson Headers, replaced third cat with spiral muffler while running a second muffler. More than enough air flow, plus doesn't drone like it did with just a pipe and looks like a cat :)
I'll might be selling my IAT adjuster and Mopar 1.7RR, and also have some stock parts.
|
kota on 20s
GenIII
7/15/2002
11:14:23
| RE: Will I need to Head Bolts?
IP: Logged
Message:
i have heard the mopar bolts are made by ARP, and cost like $10.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
dodgeboy
Dodge Dakota
JOIN HERE
7/15/2002
12:08:36
| RE: Will I need to Head Bolts?
IP: Logged
Message:
I bought mopar bolts from the dealer for 14 bucks
|
MikeD
*R/T*
7/15/2002
12:12:56
| RE: Will I need to Head Bolts?
IP: Logged
Message:
I wouldn't get ARP unless your planning on running lots of boost.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
Anthony G
Dodge Dakota
JOIN HERE
7/15/2002
12:44:26
|  RE: Will I need to Head Bolts?
IP: Logged
Message:
Great, Thanks for the tip.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
