| From | Message |
Clevite 77
Dodge Dakota
JOIN HERE
7/11/2002
00:53:52
|
 Subject: PCM programers 4.7L
IP: Logged
Message:
I was on this site and found a couple different PCM controllers, one of witch is too expensive. Has anyone hear or tryied any of these before?
http://performancecenter.com/products/?searchtype=123d&sortorder=ADA&urlsubcategory=Computer+Tuning&productcategory=Engine+Management+Systems&sf4=UNIVERSAL+ENGINE+MANAGEMENT+SYSTEMS
http://performancecenter.com/products/?searchtype=d&sortorder=&urlsubcategory=Computer+Tuning&productcategory=Venom+400+Control+Modules&sf1=DODGE&sf2=2001&sf3=DAKOTA&sf4=4.7L
|
DarkBlue Dak
Dodge Dakota
JOIN HERE
7/11/2002
11:52:17
| RE: PCM programers 4.7L
IP: Logged
Message:
Hey man I checked this out looks good to me, and
sounds good to me. I'd like to try it out with
a jet II and a Iat adjuster!!!
01 CC 4.7 5spd 3.92 ASD
4"homebrew w/9"K&N, 3rd cat off dual outlett muff,
180tstat, 3923's, JetII, port&polished 68mmTB,
TPS@.74V
|
qwikkota
Dodge Dakota
JOIN HERE
7/11/2002
12:21:19
| RE: PCM programers 4.7L
IP: Logged
Message:
25% Performance gain!? Yeah right, its called a supercharger. They shouldn't list things like that. Its probably listed for a turbo diesel or something. Someone should email them and find out if they have done any dyno tests on 4.7 or any Dakota for that matter. See if they don't just modify the specs for a different engine or if they program it specifically for our motors. Even if it was only 10%, its still not bad at $300. Does anyone know if Mopar makes/offers a dealer programmed PCM upgrade?
|
conig
Dodge Dakota
JOIN HERE
7/11/2002
14:18:06
| RE: PCM programers 4.7L
IP: Logged
Message:
I have heard good things about the aem engine management. however its a company that is derected at imports.
25% is a resenable figure I have personally seen a prelude get a 45% increase from headers, exhaust, camgears, coldair intake and a motec programable computer.
the aem is almost identicle to the motec.
|
qwikkota
Dodge Dakota
JOIN HERE
7/11/2002
15:46:56
| RE: PCM programers 4.7L
IP: Logged
Message:
80Hp from bolt ons for a Prelude? No way, only way to make that much power is to bore an engine out and fully port the heads. And then add those aforementioned bolt ons and you might get a 45% power gain. 25% is a rediculous # for a computer upgrade that does not involve a turbo setup. Only proof is before and after dyno runs. Speculation and seat of the pants are as worthless as melted Jello.
|
Glenn
Dodge Dakota
JOIN HERE
7/11/2002
16:05:31
| RE: PCM programers 4.7L
IP: Logged
Message:
At least you can drink melted Jell-O. :-)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
