| From | Message |
hardbody
Dodge Dakota
JOIN HERE
6/03/2002
17:59:55
|
 Subject: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
Hello, I have the instructions for the kit from K&N for the FIPK for the 4.7. It shows what the kit will look like. I don't know how to post a link to it so any one that would like to see the instructions please e-mail me. Just to let you know the kit looks like the one from air-raid except it does mount from the throttle body . It uses an oval filter and the filter mounts where the air-raid filter does. They still say a few more weeks before the kit will be released. At least we have an idea on what the kit looks like now,
TONY
|
chance
Dodge Dakota
JOIN HERE
2/20/2005
11:42:44
| RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
hey whats up,
i ordered an intake off ebay but the b*st*rds did not snd any instructions nor do they answer my emails, i was wondering if you could snd me these instructions your talking about, so that maybe i can get an idea. you see the MAF sensor is located in a plastic housing right behind the stock airfilter, which doesn't allow enough room for the air filter once the intake pipe is installed to the throttle bady,do you think i need to purchase an after market MAF in order for it to fit,thanx
p.s i have a '97 f150 4.6l
|
Jecht X
Dodge Dakota
JOIN HERE
2/20/2005
13:00:30
| RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
chance you should be able to get them off the K&N website. I looked them up before on there. just need acrobat reader and it should tell ya how to install it.
|
mike m
Dodge Dakota
JOIN HERE
2/20/2005
20:56:46
| RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
http://www.knfilters.com/
North America - South America - Asia - Australia/Oceania
Send all product related inquiries to: tech@knfilters.com
Phone: (800) 858-3333 or (951) 826-4000
To find a local automotive dealer in the US phone: 800-760-5319
To find a local motorcycle/powersports dealer in the US phone: 800-314-4729
K&N Engineering, Inc.
PO Box 1329
1455 Citrus St.
Riverside, California 92502
hope this helps. by the way, my $55 k&n drop in air filter got me about 5% hp increase, is 10% worth $295 to you guys, not knocking the cold air intake or you, just curious.
|
mike m
Dodge Dakota
JOIN HERE
2/20/2005
21:01:42
| RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
oh yeah,
chance, if the description for the listing you bought on ebay said or implied that your product was complete as store bought and included instructions i would leave those loosers a bad feedback. if you payed thru paypal try the buyers protection policy.
|
TexasTodd
Dodge Dakota
JOIN HERE
2/25/2005
21:55:07
|  RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
Mike,
5hp increase, with just a drop in? Did you dyno this, on the same day, same set of runs, etc, on a 4.7?
Waht were the actual nd after #'s?
Maybe you could post a digital camera picture of it like I did my stock and Superchips install.
|
Kowalski
GenIII
2/26/2005
08:07:28
|  RE: K&N intake kit for 4.7 instructions rele
IP: Logged
Message:
mike m - 10% would be worth that to me, but I don't believe there is any cold air intake on the market that gives an honest 10% gain for our 4.7. Nor do I believe I saw 5% from my drop in; but the small gain I got coupled with never having to buy an air filter again made that worthwhile.
Lead, follow, or get out of the way
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
