| From | Message |
John Cassell
Dodge Dakota
JOIN HERE
6/02/2002
11:29:04
|
 Subject: 1.7 rockers
IP: Logged
Message:
Getting ready to order the Crower 1.7 roller rockers. Would a rocker kit be better to install than just rockers? Just a street machine, no racer. I just want to make the V6 a little bit better.
|
kota on 20s
GenIII
6/02/2002
12:08:17
|  RE: 1.7 rockers
IP: Logged
Message:
just go with the regular kit. you dont need the high rpm kit for your aplication.
what kit are you going with?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
DakotaDan
*GenIII*
6/02/2002
12:33:38
| RE: 1.7 rockers
IP: Logged
Message:
Just installed mine last weekend !
Luv'em
Dan
K&N FIPK # 57-1517 * DynoMax #17748 * OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K * Autolite 3923's
Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
dakota matt
GenIII
6/02/2002
13:05:52
| RE: 1.7 rockers
IP: Logged
Message:
I installed mine last weekend too. The only problem I have is keeping my foot off the gas. They are great. I went with the regular ones since I won't be seeing 5500 RPM a lot if at all.
Matthew Lee
|
IntenseDak39
*GenIII*
6/02/2002
15:13:44
| RE: 1.7 rockers
IP: Logged
Message:
John,
they are great on the six bangers that we have... really open it up past 2500 rpms.
good luck with the install!
intensedak39
|
jkclns
Dodge Dakota
JOIN HERE
6/02/2002
18:16:59
|  RE: 1.7 rockers
IP: Logged
Message:
How hard was the application of the rockers????
|
IntenseDak39
*GenIII*
6/02/2002
18:27:27
| RE: 1.7 rockers
IP: Logged
Message:
not too bad.. if you know how to change oil and spark plugs you should be able to figure it out...
intensedak39
|
rtdkota
Dodge Dakota
JOIN HERE
6/03/2002
10:58:00
|  RE: 1.7 rockers
IP: Logged
Message:
Standard kit is good up to 5500 rpm... Installation is pretty straight forward.
(They're in stock!)
Sam
www.socaldakota.com
|
R/Truck
Dodge Dakota
JOIN HERE
6/03/2002
11:43:58
| RE: 1.7 rockers
IP: Logged
Message:
I have heard lots of people state that there rockers need adjustment or start knocking all the time. What's the deal? How reliable are rockers?
|
rtdkota
Dodge Dakota
JOIN HERE
6/03/2002
11:55:54
| RE: 1.7 rockers
IP: Logged
Message:
Yes the rockers need adjustment... When you put them on! They're an adjustable rocker, not a slap on part like the stock rockers.
They do make more noise than a friction style rocker.
Much more reliable than a high rev with a non-roller rocker. The Crower's are the highest quality available-- Plus now you can order with needle bearing tips!!!
I've sold quite a bit of these, plus use them myself (45k+ miles and going).
Sam
www.socaldakota.com
"I only sell what I use!"
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
