| From | Message |
John925
Dodge Dakota
JOIN HERE
5/14/2002
10:43:48
|
 Subject: 0305 Error Code ???
IP: Logged
Message:
I relocated my IAT and Put a 180 Deg. Stat in
now I keep getting the mill light, I tried resetting the pcm a couple times but after awhile it keep coming back on.
Could someone help me with the error code?
P 0305, I don't know what it means....
Any help would be greatly appreciated
|
EyeTrip
Dodge Dakota
JOIN HERE
5/14/2002
12:36:14
|  RE: 0305 Error Code ???
IP: Logged
Message:
Misfire #5 cyl detected
Thats what the 2000 model service manual says
|
John925
Dodge Dakota
JOIN HERE
5/17/2002
11:26:35
| RE: 0305 Error Code ???
IP: Logged
Message:
Thanks , but is that for the 2001 also?
I never had the problem until I tried autolites.
|
BlueCC00R/T
Dodge Dakota
JOIN HERE
5/17/2002
16:02:58
| RE: 0305 Error Code ???
IP: Logged
Message:
dont knock the autolites... harlow will hunt you down.. hehe
|
dak318
Dodge Dakota
JOIN HERE
5/17/2002
16:06:33
| RE: 0305 Error Code ???
IP: Logged
Message:
Harlow is obsessed with autolites, he needs them to survive.
|
YJ
Dodge Dakota
JOIN HERE
5/17/2002
16:55:10
|  RE: 0305 Error Code ???
IP: Logged
Message:
Uh oh, John925. Looks like everything may not be alright with autolites. LoL. ; )
Ummm...how 'bout "Your engine will stay...with NGK!"... ; ) I'm the next Harlow!!! Arrrggghhh!!!! ; ) Ahahaha!
Ok...."Your truck can come out and play....when you're using NGK!".... ;)
Ok, I'm done now.
YJ
Black 2K QC 4x4 4.7 3.92 KVT910DVD
Black 91 YJ 4LHO Borla | 5" | 33MT
|
IB01R/T
Dodge Dakota
JOIN HERE
5/19/2002
15:56:43
|  RE: 0351 Error Code ???
IP: Logged
Message:
HOW DO U FIX THIS TROUBLE CODE P0351?????
THANKS
|
DakotaDan
*GenIII*
5/19/2002
17:21:48
| RE: 0305 Error Code ???
IP: Logged
Message:
P0351
IGNITION COIL #1 CIRCUIT
Peak Primary circuit current not achieved with maximun dwell time
Dan
K&N FIPK # 57-1517 * DynoMax #17748 * OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K * Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
John925
Dodge Dakota
JOIN HERE
5/20/2002
03:07:02
| RE: 0305 Error Code ???
IP: Logged
Message:
still have the code 0305....I switched the coils around and still the same code. tries a new plug , same thing
I just keep disconnecting the neg. batt cable to get the light off and it comes back on between 15 and 180 miles.
What can I do? What else could It be?
|
FastRT6dakota
Dodge Dakota
JOIN HERE
5/21/2002
17:55:31
| RE: 0305 Error Code ???
IP: Logged
Message:
If it's just a P0305, and the 0351 didn't come back, then it may not even be the plug or coil. it could be an injector, it could be a manifold leak, the plug may not be in tight enough...anything that would cause a decrease in power balance on the number 5 cylinder. Hey, believe it or not, it could actually be a Crankshaft Position sensor!!!. This is the sensor that basically tells the PCM how much power each cylinder is producing. BTW, how are you driving the vehicle when the MIL comes on? Is it highway/city, accel/decel, brake/throttle, high load/low load? Some of these things in the right circumstances can trick the PCM. Anyways, if you still have the P0351, I might be one to suspect either the harness itself, or the Crank Pos. Sensor. GOOD LUCK!!!!
|
John925
Dodge Dakota
JOIN HERE
5/21/2002
18:15:22
| RE: 0305 Error Code ???
IP: Logged
Message:
Actually I never had the 0351 code , that was someone else
|
Dakaty
GenIII
5/21/2002
19:56:44
| RE: 0305 Error Code ???
IP: Logged
Message:
Go to
http://www.obdii.com/codes.asp
and do it your self
|
John925
Dodge Dakota
JOIN HERE
5/22/2002
06:21:44
| RE: 0305 Error Code ???
IP: Logged
Message:
Ok, i'm wondering if its the hole where the IAT was, where I pluged it.
Maybe it leaks there. I have the type of plug that twists in to lock.
What does everyone else with a 2001 4.7 plug the hole with?
I have a bolt threaded in with o-rings to seal it, i'm thinking it may leak because I can't really tighten it very much because of it not being a thread there to screw it in, just a small plastic piece on each side. And I think this may cause this 0305 code.
What other ways is there that I can plug it with to make a sure seal?
BTW: Thanks for all the input
|
DakotaDan
*GenIII*
5/22/2002
07:04:03
| RE: 0305 Error Code ???
IP: Logged
Message:
Why don't you just put the IAT back to stock and see if the code clears up !
Some of the 01's are even having a little problem with Bernds IAT ajuster setting off codes seems the PCM instructios are a little tighter.
Dan
K&N FIPK # 57-1517 * DynoMax #17748 * OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K * Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
8URSVT
Dodge Dakota
JOIN HERE
11/07/2004
16:05:45
| RE: 035 1Error Code ???
IP: Logged
Message:
Has any one had this error code and how did you fix it?
|
Abstaman
Dodge Dakota
JOIN HERE
11/08/2004
19:39:12
| RE: 0305 Error Code ???
IP: Logged
Message:
I replaced my plugs this weekend with Bosch Platinum 4230's and all hell broke loose. I have a 2000 QC Dak 4x4 w/5.9. At first I was getting 300 (multiple cylinder misfire), 305 (#5), 306 (#6), and 308 (#8) codes. I pulled em all back out and re-gapped and re-seated them, reset the computer and no codes but the truck is still running like ass! I'm thinking it doesn't like these plugs...any experiences with this?
|
Kentuuu
Dodge Dakota
JOIN HERE
6/04/2006
17:32:10
| RE: 0305 Error Code ???
IP: Logged
Message:
http://rgdresrfggqqw.host.com
desk3
[url=http://rgdsesrfggqqw.host.com]desk4[/url]
[link=http://rgdaesrfggqqw.host.com]desk6[/link]
|
davekamphuis
Dodge Dakota
JOIN HERE
6/04/2006
17:56:31
| RE: 0305 Error Code ???
IP: Logged
Message:
Maybe the change in your IAT sensor is just a chance thing that it happened at the same time. I have a coil go on mine already only at 90000km. Try switching the #5 coil with a different on and reset the code. If it comes up again, but on that new cylinder then it's you coil. They're not too much, like $50.00 (Cdn).
|
Obio3
Dodge Dakota
JOIN HERE
6/04/2006
19:13:42
| RE: 0305 Error Code ???
IP: Logged
Message:
Autolites do have one problem never addressed that I seen in here. They have poor quality resisters that can be defective when new. I'd try changing that plug to one of your old ones and test this possibility. As for the guy with the platnium plugs, yours is not an uncommon problem with platnium plugs. They have very very low resistance causing weak spark and if all your other ignition items are not in tip top shape you have this problem. My experiance is, when this rough idle problem exists with platnium plugs fuel milage goes south with it.
So many problems .... So little time
|
Henry Ford
Dodge Dakota
JOIN HERE
8/30/2008
21:55:47
| Maybe you should have bought a FORD
IP: Logged
Message:
I think the hole problem is Dodge sells Number 1 junk. YOU SHOULD BOUGHT A FORD!!!!!!
|
Walter C
Dodge Dakota
JOIN HERE
9/01/2008
14:42:18
| RE: 0305 Error Code ???
IP: Logged
Message:
Wow, buy a Ford. Why would anyone want to be on that sinking ship. Well, the two village idiots daddio and kowalski would. Anyhow go back to the romper room and wait for mommy and daddy to come pick you up.
|
| | P 1 Next Page>> |
