Forums
Forum Tools
|
 |
03:26:57 - 12/29/2024
Dakota Performance
| From | Message |
BlueCC00R/T
Dodge Dakota
JOIN HERE
5/12/2002
16:15:50
|
 Subject: Squealing
IP: Logged
Message:
I dont think it is the belt and someone told me that the tensioner bearing was a bad design ... anyone have problems with this tensioner bearing? the belt looks good thats why i say i dont think its the belt
|
handi2
GenIII
5/12/2002
21:44:25
| RE: Squealing
IP: Logged
Message:
With the engine running and the belt squealing or squeeking spray just a little cleaning spray like 409 or other on the suspect belt. If it is the belt, it will stop. This is not a permanent fix however.
http://photos.yahoo.com/handi254310
2002 Quad Cab SLT Plus 4.7 Every Available Option
Access Tonnoue Cover/Bedrug/360 Air Intakez/Jet Stage 2
180 Robertshaw/Roadmaster Active Suspension
Street Scene Grill Inserts
|
RTjohn
Dodge Dakota
JOIN HERE
5/12/2002
22:55:47
| RE: Squealing
IP: Logged
Message:
I changed the belt about 20,000 miles before I heard the squeking again. I only get it on some mornings with high humidity, or when the belt gets damp. I see no reason to replace it and cleaned it with teflon based tri-flow. The problem is much better an has lasted another 5,000 miles and counting.
RTjohn
99 dak r/t
MP headers, MP computer, MP 7.5 mm wires, cold air, 180 t-stat, 3923's, sir michaels roll pan, BF goodrich 255-50-17 KDWS, etc...
next step M-1 and 50 mm F&B
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
