| From | Message |
dakota657
Dodge Dakota
JOIN HERE
5/11/2002
00:05:00
|
 Subject: TB Cleaning DONE
IP: Logged
Message:
Thanks for your all's help.
TO ALL THOSE WHO HAVE NOT DONE IT> DO IT!!!
Wow there was a lot of sh## in there. I know nothing about cars and was able to do this in about an hour. so any one sould be able to do this. And for real it helps! so if oyu have any questoins if you want. But it works and sounds GREAT! Better proformance! But really is is easy! THanks again
|
lando981
Dodge Dakota
JOIN HERE
5/11/2002
01:00:14
| RE: TB Cleaning DONE
IP: Logged
Message:
so what exactly did you do...or what did you use to clean the TB.....?????? more info.... if you don't mind..... thanx for any response!!!!!!!....whats this about sounds great??????? thanx to who ever responds!!!!!
|
Joe E.
Dodge Dakota
JOIN HERE
5/11/2002
13:45:46
| RE: TB Cleaning DONE
IP: Logged
Message:
Yeah Id like info too. What truck do you have? And what power plant. Tahnx
Joe E.
|
dakota657
Dodge Dakota
JOIN HERE
5/11/2002
23:40:05
| RE: TB Cleaning DONE
IP: Logged
Message:
I have a 5.2 97, and it is the same for the 3.9 i think to and the 5.9. All i bought is some Carb cleaner the cheep spray can at the O'rilys in my town and also got a gasket, a totel of like 7 bucks. Could have cost more it i bought the expencive carb cleaner but the cheep stuff worked just a good. then all you need is some rachents and Torx 20 driver and you got it. There are some directions at SpeetTweaks.net. and there ok. But really the only thing is just take your time. Dont drop anything in your Intake manafold or engen.
Remove the TB and the sensors and then cleaning can go on, clean everythign inside and out, I dont think it maters. But i like the shiny silver look so i cleaned the hole thing. spray a little with the carb cleaner and use a towel and scrub the black, stuff off, the hole thing sould in the end be shiny.
The most confusing thing is taking off the throtel cabels. They just clip off dont break the plastic peices. remove the bults then the cables. but took me an hour and was well worth it. the stuff thet came out, i dont want that in my engen! if you want more help e mail me at pepe657@hotmail.com. Realy i though i would mess it up i know not a hole lot about cars and it is pritty easy just have the tools and every thing ready.
|
Nitro Junkie
R/T
5/13/2002
13:51:41
| RE: TB Cleaning DONE
IP: Logged
Message:
Did you have to adjust the throttle cable after reinstalling ????
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turn on I see red
Adrenaline crash and crack my head
Nitro Junkie paint me dead .....
|
CaribbeanKota
Dodge Dakota
JOIN HERE
5/13/2002
14:21:33
| RE: TB Cleaning DONE
IP: Logged
Message:
what is the part number for the gasket
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
