| From | Message |
dacuda
Dodge Dakota
JOIN HERE
5/10/2002
18:25:15
|
 Subject: MSD Wires Fitment
IP: Logged
Message:
I have the MSD 8.5mm wires on my 95 318. They fit great on the plugs but are loose on the distributor cap. I have tried to modify them with pliers but they seem to work loose. Can anyone tell if the taylor spiro pro wires from KRC ara snugger fit than mine.
Thx
BJ
|
Dakaty
GenIII
5/10/2002
19:26:18
| RE: MSD Wires Fitment
IP: Logged
Message:
My MSD Superconductors (8.5MM) "snap" securely on the distributor cap. I have to really push down on them to force the snap.
I did change my cap from the OEM to a NAPA when I did the wire change out. (Now I'm using a Borg Warner - exactly the same as a NAPA).
Make sure you're pushing the wires hard in place. Then try changing your cap (only about $7 at NAPA).
My 2 cents
|
Troy
Dodge Dakota
JOIN HERE
5/10/2002
20:01:38
| RE: MSD Wires Fitment
IP: Logged
Message:
I have the Taylor wires, and they fit everywhere very nicely. They make a good, positive snap on the distributor cap and the plugs. Hope this helps.
|
Dakota Bob
GenII
5/11/2002
02:17:40
| RE: MSD Wires Fitment
IP: Logged
Message:
I bought the 8mm red wires about 2 months ago Im not happy with them at all, the boot that connects to the plug is flemzy,not like the OEM wires. I washed my engine off the other day and it wouldn't start. I had wires I bought from a Dodge dealer and never had this problem before. I kept the wires I had bought from Dodge Im going to put them back on.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Split Fire Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, JBA Wires, MSD Blaster SS Coil
|
bassboy170
Dodge Dakota
JOIN HERE
5/11/2002
02:25:34
|  best spark plugs for supercharged 5.2
IP: Logged
Message:
hi everybody does anyone have any suggestions on what spark plug to use for a supercharged 5.2 w/msd ignition and coil also what gap works the best thanks
|
Nitro Junkie
R/T
5/11/2002
08:36:42
| RE: MSD Wires Fitment
IP: Logged
Message:
I have the 8mm Taylor's and they are great the MSD wires are overpriced and I have heard more than a few people dislike them. Get the taylors and I beleive the autolite 3923's work well with superchargers.
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turn on I see red
Adrenaline crash and crack my head
Nitro Junkie paint me dead .....
|
Mykr
Dodge Dakota
JOIN HERE
5/11/2002
09:41:01
| RE: MSD Wires Fitment
IP: Logged
Message:
I have the Taylor Full Metal Jacket wires and they fit very nicely and snap tightly to both cap and plugs..The only dissapointment is the length will not allow for factory wire routing...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
