| From | Message |
99 RT
Dodge Dakota
JOIN HERE
5/04/2002
23:47:19
|
 Subject: Gauge question
IP: Logged
Message:
Hey I was wondering where to find the pillar gauge pods for a 99 Dak. I looked at autometer.com and they only show the single gauge pillars. I wanted to know if there is anyone who makes the double one so I can install two 2 1/16" gauges. Any information would be greatly appreciated.
Thanks
Jon
|
TEAMFAST
Dodge Dakota
JOIN HERE
5/04/2002
23:50:43
|  RE: Gauge question
IP: Logged
Message:
out of curiosity, what guages are you putting
there
|
slider_buck
Dodge Dakota
JOIN HERE
5/05/2002
00:19:46
| RE: Gauge question
IP: Logged
Message:
try out www.autoaccessory.com
seems to be the cheapest place i have found so far
|
Lew360
Dodge Dakota
JOIN HERE
5/05/2002
00:44:30
|  RE: Gauge question
IP: Logged
Message:
Guage works part # 15206. Mounts any 2 2 1/16" guages.
'99 RC R/T,Gibson Headers and Cat-back,
MSD 6a BTM, IAT adjuster, Powerdyne
Supercharger.
|
99 RT
Dodge Dakota
JOIN HERE
5/05/2002
20:42:49
| RE: Gauge question
IP: Logged
Message:
Thanks for the help I will check into it. TEAMFAST, I am putting in a boost gauge and a air/fuel ratio gauge. How do I match the color of the pillar to my interior? Is there special paint to use? Thanks again for the info.
Hey Lew360, I looked on the autometer website and looked up that part number (15206), why does it say "single pod only" next to Dakota. I didn't want to buy it and have it not fit.
Thanks
Jon
|
Lew360
Dodge Dakota
JOIN HERE
5/05/2002
23:31:02
| RE: Gauge question
IP: Logged
Message:
I don't know why it says single pod only, that part # is under dual pods. I checked with my supplier and they say it is a dual guage pod. Give me another couple weeks and I can say for sure because I will be ordering my own.
99 RC R/T,Gibson Headers and Cat-back,MSD 6a BTM, IAT adjuster, Powerdyne Supercharger.
|
99 RT
Dodge Dakota
JOIN HERE
5/07/2002
18:56:21
| RE: Gauge question
IP: Logged
Message:
Lew360, I got the pillar #15206. It is a dual pod and it seems to fit fine...I havn't installed it yet but I placed it on the pillar and it looks great.
Anyone know how to paint these things? I have the charcoal interior.....Thanks for the help guys.
Jon
|
dakotakid
Dodge Dakota
JOIN HERE
5/10/2002
09:00:16
| RE: Gauge question
IP: Logged
Message:
also going to add dual guage pod and curious what to paint it with to match interior ?? going to add trans and oil temp guages. anyone add these ? - what temp range should i get on the guages ?? does pod cause more of a blind spot on the left ?? thanks
|
R/TMon
Dodge Dakota
JOIN HERE
5/10/2002
13:11:41
| RE: Gauge question
IP: Logged
Message:
http://www.txchange.com/heatchrt.htm for the temp range
And the pod doesn't block your veiw.
|
Nitro Junkie
R/T
5/10/2002
13:41:16
| RE: Gauge question
IP: Logged
Message:
Hey 99 post some pics when your done I(if you can) would like to see how they turn out.
Good Luck !
2000 R/T
Belltech 2"-3" Drop w/ Nitro Drop Shocks
40 Series Flowmaster Dumped Exhaust
8mm Taylor Spiro Pro wires w/ Autolite 3923's
Mopar Performance Distributor
180 T-Stat
Turn on I see red
Adrenaline crash and crack my head
Nitro Junkie paint me dead .....
|
99 RT
Dodge Dakota
JOIN HERE
5/11/2002
22:04:26
| RE: Gauge question
IP: Logged
Message:
I will post some pics when I finish. I am going to try and install them next weekend. I need to install my supercharger too so I want to do it all together.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
