| From | Message |
D
Dodge Dakota
JOIN HERE
4/14/2002
21:14:29
|
 Subject: speed limiter removal? APEXi
IP: Logged
Message:
My brother told me of a product that
sends your PCM a false signal, splitting the
reference wheel "speed" in half.
If you are doing 100mph, the PCM thinks your
doing 50mph. He told me that it would work
on my dak, he knows a guy who works at
APEXi, and he said it would remove the
limiter.
Anybody heard of this product?
www.APEXi-usa.com/
thanx, D
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/14/2002
22:57:49
| RE: speed limiter removal? APEXi
IP: Logged
Message:
why does everyone want to remove their speed limiter??? 115-120 isn't that fast enough for you??
what are you planning on doing, running in the craftsman truck series??? are your tires enven rated to go that fast??
|
Justin Whitt
Dodge Dakota
JOIN HERE
4/15/2002
00:00:21
| RE: speed limiter removal? APEXi
IP: Logged
Message:
Hey thats cool I'll check it out!
I want to remove my speed limiter I would like to
at least peg the speedo or try to break it.
Ll Blackdak ask if your tires were rated to go that fast well I'll tell you what. My family has
been in the ratail tire business for 23 years now
and you would have to drive 150 mph for 1-2 hours
straight to even break down the sidewall of the lowest speed rated tire.. for z, h, r, rated tires
try 3-4-5 hours of nothing but 150 mph!!!
Speed limiter be gone hell yeh!!!!!
|
HSKR
Dodge Dakota
JOIN HERE
4/15/2002
00:24:29
| RE: speed limiter removal? APEXi
IP: Logged
Message:
If that speed limiter trick works the way you described it, then how will you know if you are goin faster than the speed limiter since the speedo will not read correctly either.
|
D
Dodge Dakota
JOIN HERE
4/15/2002
02:20:57
| RE: speed limiter removal? APEXi
IP: Logged
Message:
I dont know, I checked out the site, and it
wasnt very helpful. I was hoping somebody
knew if it could work
Ll Blackdak: My limiter is at 98...not fast
enough, hell with a supercharger, I would hit
my limiter in the 1/4 mile, very embarrassing!
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/15/2002
03:48:28
| RE: speed limiter removal? APEXi
IP: Logged
Message:
u know i thought mine was 98, but then it started letting me go beyond that
only in OD off though, not in 4th
i got to 112 in third
mine is a V6 4x4 cc so i doubt u can only go 98, just mess with it
|
psychoRT
Dodge Dakota
JOIN HERE
4/15/2002
17:23:36
|  RE: speed limiter removal? APEXi
IP: Logged
Message:
I have that unit in my truck in theroy it will work all it does is cuts the signal like you said. I knew i was going to get the performance pcm so never hooked it up. It is a very simple install and looks like it will work.
|
conig
Dodge Dakota
JOIN HERE
4/15/2002
19:56:03
| RE: speed limiter removal? APEXi
IP: Logged
Message:
I didn't know apexi made a speedlimiter adjuster.
check out the afc-controller I will be getting one of those in the near future. if theres power in the splitsecond controller there has to be some in the apexi
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/16/2002
00:43:59
| RE: speed limiter removal? APEXi
IP: Logged
Message:
is 98 actually the top speed, because i thought it was and then i messed with it and turned od off and one day it just passed 98. unless its cause it did the turning the ignition at 98 thing...i dunno
|
bwerk
Dodge Dakota
JOIN HERE
9/23/2007
19:17:41
| RE: speed limiter removal? APEXi
IP: Logged
Message:
i have a 99 jaguar xjr, limiter kicks in at 155. is there any software to remove the limiter?
|
ALan
Dodge Dakota
JOIN HERE
9/24/2007
11:35:23
| RE: speed limiter removal? APEXi
IP: Logged
Message:
what ive done on every dak that ive owned is when you get to the speed limiter(which mine is at 97mph)
then press tthe gas all the way in and turn the ignition all the way forward and hold it there evrything shutss off except your engine and transmission and your tach stays on as well and you will jus fly i tested mine at that with a buddy of mines corvette and i got to 150 mph i was like holy crap but ne ways try that and tell me what you think its alota fun and doesnt mess ne thing up
|
TexasTodd
Dodge Dakota
JOIN HERE
9/24/2007
14:06:09
|  RE: speed limiter removal? APEXi
IP: Logged
Message:
On my 01, qc, 4.7, manual, yadda yadda,
was limited @ ~ 118-120
the Superchips raises it, to I don't know, cause once in rural TX, safe, flat, no intersection or other vehicles, I pegged it @ 120+.
|
OBIO3
Dodge Dakota
JOIN HERE
9/26/2007
20:03:15
| RE: speed limiter removal? APEXi
IP: Logged
Message:
Guess we'll be reading about blown Dakota engines before long here.
|
Kowalski
GenIII
9/27/2007
18:01:59
|  RE: speed limiter removal? APEXi
IP: Logged
Message:
I've heard of guys blowing engines missing a shift, or overreving in lower gears doing burnouts; but I've never heard of an engine blowing in a top speed run - where the rpms are usually limited by the truck reaching maximum velocity due to the amount of air it is pushing for the horsepower avilable. Also, a motor with no load on it will let go easier than one that is pushing that kind of load. Have you honestly ever heard of someone with stock gearing blowing their motor that way ? Other disasterous possibilities would come to my mind before that...
Lead, follow, or get out of the way
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
