| From | Message |
Got Dak?
Dodge Dakota
JOIN HERE
4/04/2002
14:31:19
|
 Subject: Home Brew Intake
IP: Logged
Message:
A while ago I saw a posting for someone who had a website with step-by-step instructions and pictures of creating and installing a homebrew intake. I've used the search and can't find it anywhere. Does anyone have the link to this page or know where I could find it?
|
nmdcommguy
Dodge Dakota
JOIN HERE
4/04/2002
15:45:57
| RE: Home Brew Intake
IP: Logged
Message:
Is this the one?
http://modernmusclecars.net/articles/coldair/index.html
|
Dakota657
Dodge Dakota
JOIN HERE
4/04/2002
15:59:21
| RE: Home Brew Intake
IP: Logged
Message:
what about a 5.2??
|
Got Dak?
Dodge Dakota
JOIN HERE
4/04/2002
16:06:00
| RE: Home Brew Intake
IP: Logged
Message:
That's the one...Thanks.
One last question...would it be much different for a V6 3.9 ?
|
pyrodak
GenIII
4/04/2002
16:23:09
|  RE: Home Brew Intake
IP: Logged
Message:
Here is what I did:
1. Bought a K&N cone from summit racing (part # KNN-RE-0810).
2. Bought a 3" 45 degree ABS elbow, 3" ABS pipe (you need under 1 foot) and 2 3" couplings all from Home Depot.
3. Removed stock airbox and hose.
4. Connect the cone to the coupling to the pipe to the 45 to the coupling to the airhat.
It turned out pretty good. I only did it on Monday and I am stil happy with it. I looked at alot of pictures on ebay to help me out with it. Hope that helps a little.
Good Luck,
Mark S.
98 Club Cab 4X2 SLT 3.9
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
