| From | Message |
Dakota Bob
GenII
 
3/30/2002
22:03:08
|
 Subject: Flex-a-Lite 150
IP: Logged
Message:
I got the fan installed yesterday all so put on a new water pump. It wasn't bad to do at all I had to mount the fan side ways to get it flush against the radiator. I can't believe how much quieter it is under the hood now.
It feels like there is a little more power too. I want it to run only when the key is on but I didn't know what to hook it up to? It has two wires to hook to positive one is for high amp and one is for the ignition. I have them both hooked up to the battery right now. Have any ideas?
Thanks
Bob
Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150
|
Phil
Dodge Dakota
JOIN HERE
4/01/2002
15:24:08
|  RE: Flex-a-Lite 150
IP: Logged
Message:
You need to run the one for the low amp (should be marked +) to the fuse box and high amp to the battery (marked B). I had a spare slot in the fuse box, on my Gen III that was hot only with the key on. HTH
|
Dakota Bob
GenII
4/02/2002
06:49:30
| RE: Flex-a-Lite 150
IP: Logged
Message:
Phil, Thanks I wasn't sure if that + wire had to be a high amp or not. They said to use the wire in the kit that red wire is kinda big for the fuse box thats why I hooked it up to the battery.
Thank you
Bob
Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150
|
Dr0p0ff
GenIII
4/02/2002
16:42:55
| RE: Flex-a-Lite 150
IP: Logged
Message:
how much is the flexalite from where?
|
Dakota Bob
GenII
4/02/2002
20:46:43
| RE: Flex-a-Lite 150
IP: Logged
Message:
Got it from Summit racing for $187.00 part #FLX-150
Bob
Cincinnati
Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
