| From | Message |
mike
Dodge Dakota
JOIN HERE
3/24/2002
12:05:58
|
 Subject: powerdyne on an r/t
IP: Logged
Message:
i have a o2 rc r/t with a powerdyne s/c #6 and a 50mm fm t.b. what do you think my hp are near also what would mt 1/4 time be
|
bernd
*GenIII*
 
3/24/2002
12:14:16
| RE: powerdyne on an r/t
IP: Logged
Message:
Add about 35% to your factory RWHP...1/4 mile time has too many variables in it to give a close figure.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Lew360
Dodge Dakota
JOIN HERE
3/24/2002
23:47:29
|  RE: powerdyne on an r/t
IP: Logged
Message:
I made 305 rearwheel horsepower, and the guys that ran the dyno said that most stock R/T's make about 190 Rearwheel. My best 1/4 time was 13.97 @ 101.9 with a traction problem 60ft of 2.30. What I really need is some traction bars and slicks.
'99 RC Dakota R/T, Custom Cold-Air, Gibson
Headers and Cat-back, APC clear tails,
MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger.
|
bernd
*GenIII*
3/25/2002
08:30:19
| RE: powerdyne on an r/t
IP: Logged
Message:
That's about on par with the 35-40% gains.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
mike
Dodge Dakota
JOIN HERE
3/25/2002
12:00:07
| RE: powerdyne on an r/t
IP: Logged
Message:
what kind of boost are you running
|
Lew360
Dodge Dakota
JOIN HERE
3/25/2002
15:13:38
| RE: powerdyne on an r/t
IP: Logged
Message:
I am running the stock 6 lb. for now.
'99 RC Dakota R/T, Custom Cold-Air, Gibson
Headers and Cat-back, APC clear tails,
MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
