| From | Message |
MikeD
Dodge Dakota
JOIN HERE
3/22/2002
11:37:49
|
 Subject: RR's or CAM
IP: Logged
Message:
Should I go for new 1.7 RR's, springs and pushrods which will be about $630 or should I go for a bigger cam which would only be $295 and a shop said $400 for install which is a little more. But which do you think I'll get the most benefit from?
|
kota on 20s
GenIII
3/22/2002
11:50:29
| RE: RR's or CAM
IP: Logged
Message:
if you live in a place where smog dosent matter, i would go with a cam... a good size cam ;-)
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
MikeD
Dodge Dakota
JOIN HERE
3/22/2002
11:56:41
| RE: RR's or CAM
IP: Logged
Message:
Kota I've seen you around on some of those MP cam posts have U heard about any good cams to get besides MP? I was thinkin KRC sells CompCams but I'm not sure how good of quality they are I know they're better than MP. Do you know anyone that is the absolute best?
|
kota on 20s
GenIII
3/22/2002
17:33:36
| RE: RR's or CAM
IP: Logged
Message:
well, i dont really know a whole lot about cams. i just talked to a guy who installed the R/T cam in his 318 and he was NOT AT ALL happy with it.
i heard the comp cams are good, but i have no experience with them. i'd give marty at krc a call and see what he has to say. then call john mercedes, and randy pile and compare notes.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Jeff P
Dodge Dakota
JOIN HERE
3/22/2002
17:38:22
|  RE: RR's or CAM
IP: Logged
Message:
Try doing some research on the new Mopar cam. Some say it will work well. (P# 5007551)
|
YA
Dodge Dakota
JOIN HERE
3/23/2002
13:13:08
| RE: RR's or CAM
IP: Logged
Message:
R/T cam works well for my 5.2.
0.02
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
