| From | Message |
gearhead71
Dodge Dakota
JOIN HERE
9/03/2002
19:06:39
|
 Subject: RE: iat relocation- more HP ?
IP: Logged
Message:
For you 4.7 guys instead of removing the one in the intake, just buy another one for less than 10 bucks and put that in your intake tube. That way if you have to go through smog check like I do, you can hook the old one back up. Just my $0.02. Got any change?
|
Andrew
Dodge Dakota
JOIN HERE
9/01/2003
19:55:41
|  RE: iat relocation- more HP ?
IP: Logged
Message:
Where did you find one/and how much? I can't find the damn things anywhere. Mine is a 2002 4.7 4X4.
Thanks,
Andrew
|
pogi
Dodge Dakota
JOIN HERE
11/28/2003
22:42:35
|  RE: iat relocation- more HP ?
IP: Logged
Message:
Did somebody relocate their IAT inside the cab and blast the AC.That's a real cold air. Or install a flex pipe from the AC vent and mount the other end in front of the K&N cone air filter.
What do you think about this?
|
sniper
Dodge Dakota
JOIN HERE
11/29/2003
02:11:53
| RE: iat relocation- more HP ?
IP: Logged
Message:
oh yeah so that way the horsepower you gained would be lost because the a/c is on. smart one!!
|
Demon Dakota
DakotaEnthusiast
11/29/2003
13:45:25
| RE: iat relocation- more HP ?
IP: Logged
Message:
The IAT sensor costs like $5...I purchased mine from Metro Dodge in Snellville, GA...
Moving it to a colder more direct airflow area of the truck would definitely net you some more power (especially over my setup, which had the sensor on the intake manifold itself).
Your other option would be to build the IAT adjuster and trick it into thinking it is colder than it actually is.
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
Custom tranny VB Mod
Demon long tube headers
Ported/polished heads w/ 1.92" Intake/1.60" Exhaust Valves
One dead stock LSD unit (POS...)
|
wwturner
Dodge Dakota
JOIN HERE
8/14/2004
02:58:50
| RE: iat relocation- more HP ?
IP: Logged
Message:
Here's a cool idea... Does anyone know if it would work to leave the factory IAT in it's original place, install a second one in the cold air intake tube, then put a switch in the dash to switch between the two AIT's on the fly? If it works, this would be an AWESOME application if you're setting at a stop light and a ricer pulls up and wants to play. hehe
|
DA
Dodge Dakota
JOIN HERE
7/11/2005
21:52:01
| RE: iat relocation- more HP ?
IP: Logged
Message:
I have a 2001 3.9. Where is the IAT sensor located? I want to put the speed resistor wire in ?
|
New Owner
Dodge Dakota
JOIN HERE
7/12/2005
10:36:15
| RE: iat relocation- more HP ?
IP: Logged
Message:
This is my first new vehicle since 1990 but what does iat stand for?
|
Josh
Dodge Dakota
JOIN HERE
7/12/2005
14:36:15
| RE: iat relocation- more HP ?
IP: Logged
Message:
Intake Air Temperature.
|
Doug
Dodge Dakota
JOIN HERE
7/12/2005
14:43:06
| RE: iat relocation- more HP ?
IP: Logged
Message:
Relocating the IAT sensor to a colder climate merely richens the air/fuel mixture. Granted, you get a bit more power that way, but soon your tailpipe, and O2 sensors, and catalytic converter will be coated with a fine layer of soot. It's from unburned hydrocarbons, and is electrically conductive - not a good thing for the O2 sensors.
|
| | <<Previous Page P 2 Next Page>> |
