| From | Message |
jon
Dodge Dakota
JOIN HERE
10/24/2006
12:39:18
|
 Subject: RE: 5.7 Hemi article
IP: Logged
Message:
need a hypertech reprogrammer for 03 dodge hemi 4x4
|
1 TON
Dodge Dakota
JOIN HERE
12/19/2006
23:36:50
|  RE: 5.7 Hemi article
IP: Logged
Message:
BUY ONE
|
murray
Dodge Dakota
JOIN HERE
7/06/2008
09:44:44
| RE: 5.7 Hemi article
IP: Logged
Message:
I have a ticking noise on the right side, I thought it may be an exhaust leak but I had the exhaust tightened. What could it be?
|
Murray
Dodge Dakota
JOIN HERE
7/06/2008
09:49:21
| RE: 5.7 Hemi 2003 ram 2500
IP: Logged
Message:
I have a ticking noise on the right side, I thought it may be an exhaust leak but I had the exhaust tightened. What could it be?
|
Kowalski
GenIII
7/06/2008
12:28:42
| RE: 5.7 Hemi article
IP: Logged
Message:
Did you tighten at the doughnut, or the manifold ? Could still be an exhaust leak - sometimes if the gasket blows out, tightening will not fix it. Could also be a loud ticking lifter.
Lead, follow, or get out of the way
|
markb
Dodge Dakota
JOIN HERE
7/20/2009
22:46:13
| RE: 5.7 Hemi article
IP: Logged
Message:
2006 Hemi
Valve guide and valve to cylinder #3 broke.
Is this common to the hemi?
|
LeaseMO
Dodge Dakota
JOIN HERE
7/25/2009
14:29:23
|  RE: 5.7 Hemi article
IP: Logged
Message:
"Josh - enjoy your new hemi; but I'll bet there's a few half ton Dak's on this board you can't outrun ! j/k"
Well Gee Gerrick that's funny because I thought the 1500 series Ram was a 1/2 ton.
Just proves you not as smart as you think. Probably your brain is not completely defrosted yet. LOL
Also the Dakota weighs in at 3500 lbs so don't give me that smart arse stuff! And it would be a 1/4 ton truck if classified by tonnage.
|
math lesson
Dodge Dakota
JOIN HERE
7/26/2009
12:31:26
|  RE: 5.7 Hemi article
IP: Logged
Message:
The Dakota can haul 1000 lbs in the bed, along with a couple of guys in the cab. For those like "LeaseMO" (STS) who are more challenged by math - that is a half ton. There are some ways that the Dakota is even stronger than the full size half ton. That hardly makes it a 1/4 ton truck, as you foolishly claim.
|
Ace
Dodge Dakota
JOIN HERE
8/07/2009
13:30:06
|  RE: 5.7 Hemi article
IP: Logged
Message:
My husband has a 04 Dodge Ram 1500, 5.7 Hemi, gots 46,177 miles on it. Back at the end of June is started running bad so he pulled the plugs found to bent, so we got new plugs. He got in it the next day to go to work it did the same thing. we got a wrecker to take it to Dodge they tore it apart and found 3 cylinders with 3-4" cracks on them. Just wondering if anyone else has had the same problem/
|
Jeff Giannina
Dodge Dakota
JOIN HERE
2/17/2010
09:55:47
| RE: 5.7 Hemi article
IP: Logged
Message:
I have a 2003 2500 5.7L with 81K miles. I also have a broken valve spring. Now I am facing an engine re-build. I have had nothing but problems from the start with this truck. New PCM, new Rear end (dealer found a factory adjustment wrench left in the axle), pinon seal replaced, left rear flange gasket replaced. The battles with Chrysler and my dealer have not been pleasant, I will never purchase a dodge again! If you are thinking of purchasing the Hemi in any product line, I would highly recommend getting the extended warranty. I also recommend that while in warranty you take it to the dealer right away, give them 3 chances to fix, then quickly invoke your lemon law rights, you have a limited time to invoke the lemon law. The dealer and Chrysler will make every attempt to drag out the process, do not let them!
|
Der Idiot
Dodge Dakota
JOIN HERE
2/18/2010
17:14:44
| RE: 5.7 Hemi article
IP: Logged
Message:
Before you went to your usual male nude beach site(of which I won't even name because only you can do that) you just had to give out your .5 cents in disputing Leasemo(Not STS) and loosing every bit of that argument.
First of all, just because it carries 1/2 a ton in the bed does in no way make it a 1/2 ton truck in ranking. The name doesn't refer to the weight of the truck! Back in the old day's that have might be true; but it's now about rank rather than classification based on payload.
Since the Ram 1500 is classified as a 1/2. That would indeed make the Dakota a 1/4 of a truck.
So there you go idiot boy! I hope you argue with that all day long!
P.S Math Lesson= Gerrick Doherty who couldn't even give a proper lesson in common sense.
|
super bee
GenI
2/20/2010
11:13:18
| RE: 5.7 Hemi article
IP: Logged
Message:
funny, my 3500 can carry 3000 lbs, is it a 1.5 ton? a long bed dually 3500 can carry like 5k, is it a deuce and a half?
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) Powertrax "traction system", 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
Joe.C
Dodge Dakota
JOIN HERE
2/20/2010
17:40:32
| RE: 5.7 Hemi article
IP: Logged
Message:
Depends on what modle you get. I think the 08-09 Chassis Cab was more like 2.5 tons. But still classified as a one ton truck.
I guess smarty pants was thinking of a 48 modle Dodge.
|
U Jackazz
Dodge Dakota
JOIN HERE
2/20/2010
17:52:56
| RE: 5.7 Hemi article
IP: Logged
Message:
modle huh?
and you're calling someone else dumb!
|
super bee
GenI
2/21/2010
14:32:39
| RE: 5.7 Hemi article
IP: Logged
Message:
even in the old days, there was a Jeep j-20 that could be outfitted for 9700 GVWR
the truck only weighed like 6000 lbs
and that was in the 70s
they haven't gone by that system in MANY MANY moons
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) Powertrax "traction system", 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
the dude
Dodge Dakota
JOIN HERE
2/22/2010
11:41:57
| RE: 5.7 Hemi article
IP: Logged
Message:
Try explaining that to web troll.
Remember the IH pick-ups?
|
cbeegle
Dodge Dakota
JOIN HERE
3/08/2010
08:53:29
| RE: 5.7 Hemi article
IP: Logged
Message:
Bought a really clean 2005 Grand Cherokee with
105,800. Now, two weeks later, 106,800...broken
valve spring assumed. Still working on tearing down
the engine to see exactly whats going on, but a loud
ratcheting sound coming from the #8 cyl judging by
the "Cylinder 8 misfire."
I haven't really ran it hard, but I guess the
previous owner did...
|
STS
Dodge Dakota
JOIN HERE
3/08/2010
18:53:27
| RE: 5.7 Hemi article
IP: Logged
Message:
What is with those valve springs?? I was going to buy a Cherokee (regular) and turned out, there was a loose rod and bad springs.
|
simple man
Dodge Dakota
JOIN HERE
3/19/2010
00:35:51
| RE: 5.7 Hemi article
IP: Logged
Message:
I have 01 dakota V6 mag.with new dash want to convert to 5.9 mag!from what I can tell everything is the same is that true?will my V6 tranny bolt to the V8?I don't kn what tranny I got it has 14 bolt pan?can I splice into my injectors?if so where?can I keep my computer?is this conversion that much of a hassel?
|
simple man
Dodge Dakota
JOIN HERE
3/19/2010
07:33:10
| RE: 5.7 Hemi article
IP: Logged
Message:
01 dak0ta V6 mag c0nvert to 00 5.9 mag what do I need to kn?
|
| | <<Previous Page P 3 Next Page>> |
