| From | Message |
drtswinger
Dodge Dakota
JOIN HERE
2/13/2002
09:31:44
|
 Subject: Running 9#'s Safe?
IP: Logged
Message:
I have the 99 rt with the blown head gaskets. I was only running 6#'s, but they blew. My question is, after replacing all the top gaskets with fel-pro, adding an m1 intake, with mildly ported and polished heads,K&N intake, exhaust (high flow cat and single chamber flowmaster).... and soon to be headers, along with the msd btm... Can I safely run 9#'s on the street, or should i just hold off untill the track and run six on the street. By the way, this is a powerdyne unit. thanks
|
kota on 20s
GenIII
 
2/13/2002
20:37:28
| RE: Running 9#'s Safe?
IP: Logged
Message:
should be cool, but you might want to go with the 24# injectors
|
bernd
*GenIII*
2/13/2002
20:50:41
| RE: Running 9#'s Safe?
IP: Logged
Message:
Install a new set of head bolts as well. Mopar Performance is fine on the bolts but I personally prefer ARP (studs if you can do it).
9# boost isn't a problem though. Definitely get the 24# injectors though.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
