| From | Message |
juniork
Dodge Dakota
JOIN HERE
2/07/2002
13:57:15
|
 Subject: which throttlebody for my 4.7?
IP: Logged
Message:
I am looking to get a performance throttle body for my 2002 CC 4.7 5-speed. I have dual exhaust, cold air intake, and the TB spacer will go on with the Throttle body. Any suggestions on brands? Anyone have any good or bad experiences with them? Thanks.
|
CThomp
Dodge Dakota
JOIN HERE
2/07/2002
14:13:02
| RE: which throttlebody for my 4.7?
IP: Logged
Message:
Your only option is flometrics. This is good TB though. You more than likely have a 68mm already. Upgrading to a 70mm will give you a little more punch and going to a 72mm should give you considably more. With the 70 & 72 you will need a 4" intake. The intenseperformance z-tube will fit and I heard the volant intake will fit the 70. The TB spacer may or may not fit the TB.
|
Auzzie
Dodge Dakota
JOIN HERE
2/07/2002
23:13:58
| RE: which throttlebody for my 4.7?
IP: Logged
Message:
juniork,
If you are only looking minimal improvement in performance then go ahead with the TB upgrade. But they do not come cheap. I would just save my money until I could buy a supercharger or Turbo. You are only going to take off a couple of tenths in your quarter mile times, which you will hardly notice. Most of the upgrades for performance like exhaust, intakes, plugs, etc. gain you little except a better sound. Save the money and get a supercharger and really FEEL the difference.
Later
auzzie
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
