| From | Message |
Boettli
Dodge Dakota
JOIN HERE
1/30/2002
13:00:57
|
 Subject: Remove fan on 4.7l?
IP: Logged
Message:
I have a 2001 4.7l dakota and I want to know how to remove the main belt driven fan. I have an electric fan that came with the truck, and I put a 180degree thermostat, I doubt I will need the fan that puts a little more strain on the engine.
Looking for cheap horsepower.
thanks
|
Todd Bouton
Dodge Dakota
JOIN HERE
1/30/2002
22:40:52
|  RE: Remove fan on 4.7l?
IP: Logged
Message:
I took a pipe wrench, 1 ft piece of 2x4, and some spray between the large nut and the pulley.
Place pipe wrench, (or wrench that fits it), put 2x4 length ways on end of wrench, (so da hammer ain't near the motor or radiator), and hit the 2x4 with a hammer. One good tap is all it took on mine!
|
Todd Bouton
Dodge Dakota
JOIN HERE
1/31/2002
00:20:17
| RE: Remove fan on 4.7l?
IP: Logged
Message:
Also see my response to a post on the other forum you posted.
Todd
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
