| From | Message |
jeff
Unregistered
3/25/2001
23:58:05
|
 Subject: injectors
IP: Logged
Message:
i have a 96 318 and i want to know if i could put in Ford Motorsport Cobra Injectors in my truck? Will I see hp gains? Please help
96 318 5sp single cab
|
Bernd
GenIII
3/26/2001
00:03:01
| RE: injectors
IP: Logged
Message:
FMS 19# "High Flow" Injectors work very well.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
jeff
Unregistered
3/26/2001
00:14:16
| RE: injectors
IP: Logged
Message:
Bernd did you see a big or good difference between stock mopar injectors and cobra one's, and can i go to and 4.6 cobra and get these injectors? what do you mean by #19's, do they have that written on them?
please write back
|
Lewis
Dodge Dakota
8/27/2001
00:23:54
| RE: injectors
IP: Logged
Message:
The 93-95 cobras had 24# injectors. Stock 86-95 GTs had 19# injectors. I don't know what the 96 and up use. I believe that the stock injectors on the dakotas or at least R/Ts are 19#.
|
Hog Head
Gen II
8/27/2001
11:51:10
| RE: injectors
IP: Logged
Message:
Just installed the FMSD 19#ers in my 98' 5.2 and they are working well. Needed to replace stock Mopar injectors, and did not want to pay 95.00 ea. Gettin ready to install KB s/c this week. Figured might as well change inj. before they get to hard to get at.
'98 True Blue Dak
John
|
BlkBird
Dodge Dakota
8/27/2001
18:32:34
| RE: injectors
IP: Logged
Message:
Ford injectors work fine in a Dak. 19lb injectors are what you have stock, but I tried 24lb when I was stock and ran too rich. I would'nt suggest upsizing until you have quite a few mods done, until then Id stick with 19lbs. Why do you think you need new injectors anyway?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
