| From | Message |
Daniel Grubb
Dodge Dakota
12/29/2001
19:15:59
|
 Subject: Will a 2.2 FWD Fit in a Dakota?
IP: Logged
Message:
I recently purchased a 1987 Dakota and it is starting to knock. The motor has been replaced before. The last owner said it is out of a FWD (It has a front oil sump). Has anyone know if this is true? Is their any other motors that could possible bolt up to the manual transmission?
Thank You, Daniel
|
McClane
Dodge Dakota
1/02/2002
16:17:08
|  RE: Will a 2.2 FWD Fit in a Dakota?
IP: Logged
Message:
I don't know if this is what you're looking for, but check it out.
http://www.geocities.com/berksglh/87dakota.html
|
dave berken
Dodge Dakota
JOIN HERE
3/01/2002
13:06:41
| RE: Will a 2.2 FWD Fit in a Dakota?
IP: Logged
Message:
I used the motor from a 86 dodge lancer turbo FWD. If I remember corectly, the crank is specific to the truck in that it has a larger pilot bushing in the clutch end of the crank. You could probabbly have any mechine shop thet works with cranks, bore out the hole and insert a bushing. The FWD block i used also needed 2 of the bosses on the block drilled and taped to accept the dakotas motor mounts.
Otherwise the blocks and internal should all be the same.
Hope this helps....
berksglh@juno.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
