| From | Message |
Anthony G
Dodge Dakota
12/11/2001
11:39:47
|
 Subject: Intake Gaskets and Bolts
IP: Logged
Message:
I've decided to modify my Beer Keg intake myself. My question is, are new bolts required to correctly torque down the intake manifold again?
Where would be the best place to get some new gaskets? How much torque should I use and which pattern should I torque the bolts down?
|
Brian024.7
Dodge Dakota
12/11/2001
15:50:51
|  RE: Intake Gaskets and Bolts
IP: Logged
Message:
before doing that I think you should get a factory service manual, and that should answer all your questions.
|
bernd
*GenIII*
 
12/11/2001
17:03:35
| RE: Intake Gaskets and Bolts
IP: Logged
Message:
YES...replace the factory bolts as they are "Torque to Yield" (one use and then throw away).
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.93 @ 93.26mph
|
litlpunisher
GenIII
12/11/2001
17:10:21
| RE: Intake Gaskets and Bolts
IP: Logged
Message:
Yeh no kidding. You think I would have done all my mods at once, but no so I must have spent a sh1t load of money on intake gaskets and bolts.
98 Dakota
Bottle fed 340ci
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
