| From | Message |
Greg
Unregistered
3/16/2001
19:02:21
|
 Subject: Jet-II effectiveness decreases over time?
IP: Logged
Message:
Howdy!
In talking with a friend today about the Jet-II chips, he mentioned they're only good for a couple of days. He explained that the PCM will figure out the jet2 adjustments and step down on its part to balance out over the course of a couple of days.
That true? Seems lame.
How much would it cost to get the mopar pcm for a 2000 V6...installed(dealer flash)?
Thanks!
-Greg
|
btt
Dodge Dakota
JOIN HERE
1/17/2003
22:33:34
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
btt
|
Ryan33
Dodge Dakota
JOIN HERE
1/18/2003
02:12:59
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
There is no mopar pcm's for v6's...I dont think the jet chip "dies" as your friend says. I have been running mine for about a year and a half now and when I take it out and reset the computer without it there is a MAJOR difference in power and in gas milage. I am going down to have my truck dynod in about 2 months and will get a dyno with and without the jet chip...I will let everyone know what the results are.
|
chris
Dodge Dakota
JOIN HERE
1/18/2003
08:27:56
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
Ryan 33, what motor do you have ,stick or auto?
|
kevster
Dodge Dakota
JOIN HERE
1/18/2003
09:13:15
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
I use the Stage II on my 4.7 automatic, . For the past 3 months now works awsome, trans shifts way better and accelerates quicker. I use 89 octane fuel. Works great for me. I am happy. The stock Pcm shoots out the signals, the Jet takes them and modifies those signals.. It would be different if the Jet inputed the signals into the Pcm but this is not how it works..Jet module modifies the factory Pcm signal this is why it will never break down, nor the Pcm will ever catch on..
|
big_torque
Dodge Dakota
JOIN HERE
1/18/2003
10:42:57
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
Kevster must work for Jet
|
Ryan33
Dodge Dakota
JOIN HERE
1/18/2003
12:28:13
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
I have v6 auto.
|
t
Dodge Dakota
JOIN HERE
1/18/2003
12:50:43
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
You do know, that this was a post from 2001!!!!!
what the f97K is btt anyway, and who the h#^^ keeps digging up these OLD posts?
maybe it's 'brint it to the top'?
Lets stay in this last few months, or start anew, OK?
|
texaslawdawg
Dodge Dakota
JOIN HERE
1/18/2003
15:12:06
| RE: Jet-II effectiveness decreases over time?
IP: Logged
Message:
Kevster: The vehicle has numerous sensors throughout every major system that feeds info back to the PCM. It seems that it would be very possible for the JET to adjust settings initially, then as the new info is passed to all the individual sensors they in turn tell the PCM to adjust for those diferences, maybe after a while the PCM could "learn" to make adjustments to the JET input..... Just a thought.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
