| From | Message |
Jason
Dodge Dakota
8/22/2001
13:45:03
|
 Subject: 4.7 replacement muffler part #'s?
IP: Logged
Message:
Does anyone have any part #'s available for replacment mufflers for the 4.7?
I have a 2001 RC Sport and don't want to upgrade to a full cat back. The stock pipes seem to be adequate, so I just want to swap out the muffler. It seems that the consensus on this board is that the Flowmaster 50 series is the best muffler for these trucks, but nobody has really mentioned any part #'s. Also, is anybody running Edelbrock RPM Series mufflers or a catback?
|
Tad W
Dodge Dakota
8/22/2001
13:56:17
|  RE: 4.7 replacement muffler part #'s?
IP: Logged
Message:
Dynomax Super turbo #17698. Just slightly louder than stock. Has 3" in and out but muffler shop was able to weld it in.
2000 sport 4.7 4x4 auto tran
|
BB2DAK
Dodge Dakota
8/22/2001
14:06:34
|  RE: 4.7 replacement muffler part #'s?
IP: Logged
Message:
For Dynomax SuperTurbo Mufflers, check out:
http://www.a-1performance.com/super_turbo/index.htm
http://www.a-1performance.com/super_turbo/mufflers/index.htm
2001 Quad Cab SLT+ 4.7L 5-Speed 3.55 Lslip
K&N Drop-in, Garnet Red ARE Cap,
ArmaCoat Sprayed in Bed-liner
https://www.dodgedakota.net/albums/viewer/101.htm
|
Jason
Dodge Dakota
8/26/2001
10:44:35
| RE: 4.7 replacement muffler part #'s?
IP: Logged
Message:
Well, I'm still at it with the research. I'm trying to find something that will be as little hassle as possible. So far I'm considering the DynoMax Ultra-Flo #17518. Based on my measurments, it should bolt right up without much if any other modifications to the exhaust. My only concern is whether or not it will be too loud? I never thought I would hear myself say that, but I don't want too much interior resonance. I think it's between that and the Flowmasters now. We'll see. If anybody is running an Ultra-Flo, I'd be interested to hear your comments on it. You can email me if you like so as not to take up too much bandwith here on the board. Any input is greatly appreciated.
-J
'01 RC Sport Plus 4.7 4x4
|
las
Dodge Dakota
8/26/2001
16:35:39
| RE: 4.7 replacement muffler part #'s?
IP: Logged
Message:
Trust me, go with the dynomax fully welded ultraflow muffler, its like the regular ultraflow but its a little louder. I have the muffler and it sounds superb
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
