From | Message |
Jim Dodge Dakota
8/01/2001 01:39:34
|
Subject: H.P and Quarter mile times IP: Logged
Message: Would like to get some feed back on what I have gained as far as horsepower, quarter mile and 0-60 times. This is what I have done:
98 5.2 V-8 Club Cab Auto 3.55 gears
50 mm Quick D throttlebody
MSD ignition and wires
ACCELL Coil
Jet Chip stage 1
Headers
Flowmaster exhaust
180 T-stat
1.7 Crower roller rockers
IAT Adjuster
3923 plugs
Borge Warner cap and rotor
K&N GenII kit and air filter
traction bars
Next will be shift kit and maybe limited slip diff. Bought truck used back in March of 2000 didn't have a choice in this option. Thanks guys!
|
Wayne Dodge Dakota
8/01/2001 07:13:13
| RE: H.P and Quarter mile times IP: Logged
Message: 60 ft. = ~2.35
1/4 = 15.4-15.5
At sea level. Just my guess.
|
Jim Dodge Dakota
8/01/2001 12:48:54
| RE: H.P and Quarter mile times IP: Logged
Message: Thnkas Wayne. Wish I had 3.92 and limited slip.
|
BH-R/T Dodge Dakota ![Email](https://www.dodgedakota.net/amb/icons/email.gif)
8/02/2001 01:04:36
| RE: H.P and Quarter mile times IP: Logged
Message: I would say you have about 50 more h.p. with those boltons,I also agree with Wayne on those times,getting the 3.92 LS would be a good move,dont use a transgo shift kit,use a fairbanks or a superior transmission shift kit,their system is much better.Good luck with your dak.
|
Jim Dodge Dakota
8/02/2001 02:43:43
| RE: H.P and Quarter mile times IP: Logged
Message: where can I get those types of shift kits??
|
BH-R/T Dodge Dakota ![Email](https://www.dodgedakota.net/amb/icons/email.gif)
8/02/2001 02:54:04
| RE: H.P and Quarter mile times IP: Logged
Message: Type Superior or fairbanks into yahoo search , they are the same company and have a web sight and are very helpful , email them and they will give you the correct part # for you truck very promptly.Good Luck.
|
Jim Dodge Dakota
8/03/2001 23:54:04
| RE: H.P and Quarter mile times IP: Logged
Message: Any Suggestions on othermods I should do that I have not listed and that don't cost as much as a blower????
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|