| From | Message |
strvnbutdrvn
GenII
 
4/06/2009
16:17:06
|
 Subject: Removing emissions crap
IP: Logged
Message:
Removing the EGR, Evap Cannister, Transducer and check valve. All have electrical connection. Anyone done this and what was result? Do I need to bypass or rewire anything? Any performance gains or loss?
|
JasonB
Dodge Dakota
JOIN HERE
4/07/2009
20:31:30
| RE: Removing emissions crap
IP: Logged
Message:
Depends.
What year, what engine?
|
well
Dodge Dakota
JOIN HERE
4/08/2009
04:56:28
| RE: Removing emissions crap
IP: Logged
Message:
you might want to do some reading and educate yourself on the EGR valve
because,
the engine will run better &
give better fuel economy with it
and will also Ping like hell without it
|
?
Dodge Dakota
JOIN HERE
4/29/2009
08:21:36
| RE: Removing emissions crap
IP: Logged
Message:
Many of these things are 'monitored' by
the ECM - engine computer , without them
or an equivalent 'dummy' , will go into
fault mode - = poor performance and fuel
mileage , depending on year and trans .
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
