From | Message |
Chris Dodge Dakota JOIN HERE ![Email](https://www.dodgedakota.net/amb/icons/email.gif)
11/14/2008 07:09:29
|
Subject: 318 5.2 magnum IP: Logged
Message: Hi i was wondering if i could get some advice on a little 318 build, its a 1996 out of a 4x4 dak. im going to rebuild it and while im at it i want to get a few more HP out of her its compleatly stock at the moment and the rest of the truck is in great shape, so im willing in invest 2000-3000$ and i have the ablility to do it myself so there will be no shop costs above that so any good ideas?
|
rammer Dodge Dakota JOIN HERE ![Email](https://www.dodgedakota.net/amb/icons/email.gif)
11/18/2008 00:16:45
| RE: 318 5.2 magnum IP: Logged
Message: check out hughes engines, or you can supercharge or turbo it. my 318 only lasted to 13-14psi but was ok at 7psi or so.
|
93/96Dak Dodge Dakota JOIN HERE
11/18/2008 06:44:02
| RE: 318 5.2 magnum IP: Logged
Message: http://www.precisionengine.com/rebuilt-engines/dodge-crate-engines/index.html
Try here too. I haven't checked to see what kind of warrenty they have though.
|
wantn a 360 Dodge Dakota JOIN HERE
1/12/2009 16:41:43
| RE: 318 5.2 magnum IP: Logged
Message: i rebuilt a 98 5.2 a few years ago, what i did to it was have the heads machined to accept chevy higher rate valve springs, to go with 1.6 roller rockers and a comp better lift/duration cam, installed main studs and had crank line honed, along with ARP head bolts to hold it all toghther snug, also took a diegrinder to the heads and intake to port match and deburr and polish a tad, thing ran like a top till over the weekend i blew a heater hose and cooked the engine goin down the highway cuz my autometer temp guage needle fell off a while back.......
im now looking for a 360....
|
loe Dodge Dakota JOIN HERE
1/12/2009 22:06:19
| RE: 318 5.2 magnum IP: Logged
Message: what a dwebus
|
shotof360 Dodge Dakota JOIN HERE
1/14/2009 01:20:00
| RE: 318 5.2 magnum IP: Logged
Message: ohhh perhaps you clicked on the wrong forum youngster, run along home loe :(
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|