| From | Message |
P Bain
Dodge Dakota
JOIN HERE
4/03/2007
01:02:15
|
 Subject: Spark Plugs
IP: Logged
Message:
What type of spark plugs seem to work the best in the 3.9L? I have used Bosh platinums and found that they turn white in no time at all. From what I know, white means they are getting too hot. The only type that seem to not turn white are the basic copper champion plugs. There must be something better on the market than the copper champions that are rated for "higher temperatures" and wont turn white.
Any recommendations?
Thanks
|
Bob Lincoln
Dodge Dakota
JOIN HERE
4/04/2007
08:37:50
|  RE: Spark Plugs
IP: Logged
Message:
So run Champions. They're OEM in most MoPars.
|
NGK guy
Dodge Dakota
JOIN HERE
4/04/2007
11:41:52
| RE: Spark Plugs
IP: Logged
Message:
NGK's v-power
check the V6 board
a short time back one of the regulars
(Larry) did dyno runs
trying 4 differ. plugs
only plugs that came up better was E3's
|
kj
Dodge Dakota
JOIN HERE
4/06/2007
19:19:31
| RE: Spark Plugs
IP: Logged
Message:
Run the Champions. That's what Chrysler engineered their engines to run on.
|
Forseti
Dodge Dakota
JOIN HERE
4/06/2007
19:37:07
| RE: Spark Plugs
IP: Logged
Message:
Hey kj ...... do you really think Chrysler picked a spark plug to use and then engineered their engines around it ? They use champions because they are the cheapest bulk plug supplier .... have run NGK for a very long time now and I haven't had a problem ... and check with KRC.. Marty has been using them for a long time too....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
