| From | Message |
tonyG
Dodge Dakota
7/15/2001
21:28:00
|
 Subject: help? chk eng lite on after plug change
IP: Logged
Message:
help me ?
i just put in 3923 plugs and now my check engine light is on i unhooked the neg cable and did the reset to computer but it is still on any ideas???
2000 dak 4x4 4.7 3:92ls loaded
|
tonyG
Dodge Dakota
7/15/2001
21:42:37
| RE: help? chk eng lite on after plug change
IP: Logged
Message:
ok guys sorry for the emergency
i feel like a boot camp rookie some one come over here and slap me damm
i forgot to connect the plug that is under the 2 pipes under the air box cap #3 wire
i reset the computer and no check engine light DOH!!!!!!
|
Bruce P.
Dodge Dakota
7/15/2001
21:44:12
| RE: help? chk eng lite on after plug change
IP: Logged
Message:
Did you 'pull' the troublecode and look it up to see what the failure mode is?
To pull the code:
Without turning the starter... turn the keyswitch starting at OFF to ON-OFF-ON-OFF-ON. Leave it ON at this point. Watch the odometer display as a diagnostic runs through the onboard memory. At the end of the diagnostic sequence... any stored error code(s) will be dispalyed.
Look this code up in the Service Manual. (You did get one with your truck...right?)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
