| From | Message |
kota on 20s
Dodge Dakota
7/15/2001
04:19:52
|
 Subject: stroker kits
IP: Logged
Message:
i have heard of people strokeing their 360 in the R/T's to 408 cid (or something close to this). is there a kit like this for the 318? will this pass smog in california, and how reliable is this for a daily driver?
Eric
|
bernd
Gen III
7/16/2001
00:41:20
| RE: stroker kits
IP: Logged
Message:
Anything is possible...as for passing emissions in CA, if you retain all the factory emissions equipment (or use CARB Approved aftermarket accessories), you should be fine even with a slightly hotter cam. Keeping the cats intact of course.
Visually, they can't tell the difference.
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
kota on 20s
Dodge Dakota
7/16/2001
18:09:42
| RE: stroker kits
IP: Logged
Message:
are the bores in the 318 smaller than the 360? or is the crank just larger? thanks
Eric
|
redbone
Dodge Dakota
7/16/2001
20:27:53
| RE: stroker kits
IP: Logged
Message:
the 318 has a 3.91 in bore with a 3.31 in stroke and a 6.31 in rod a 360 has a 4 in bore same rod length bigger mains on the crank same size rods journal as the 318 and i believe the same stroke also but dont quote me on this
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
