| From | Message |
Woodrow
Dodge Dakota
JOIN HERE
9/23/2006
15:28:02
|
 Subject: Roller rockers
IP: Logged
Message:
I have been looking at the Harland Sharp 1.7 roller rockers.Where is the best place to buy them for the least amount of money.Also what else should be done when these are installed,Do I need new pushrods or new valve springs or anything else.
Thanks in advance for the info and help!!!!
1993 5.2 2wd
M-1 intake
ported TB
Taurus 2 speed Electric fan with Aluminum shroud.
mopar performance computer
4.10 W\ Tru trac
rollin on 235\55\17
|
Mr Google
Dodge Dakota
JOIN HERE
9/23/2006
15:57:42
| RE: Roller rockers
IP: Logged
Message:
http://www.harlandsharp.com
|
Adam
Dodge Dakota
JOIN HERE
9/23/2006
17:31:07
| RE: Roller rockers
IP: Logged
Message:
Summit racing has them for under $300
|
ScojoDak
Dodge Dakota
JOIN HERE
9/23/2006
18:01:13
| RE: Roller rockers
IP: Logged
Message:
To run the HS non adjustable rr's, you dont need additional parts such as pushrods and valve springs. Just bolt on and go. Dont let anybody tell you that you need taller valve covers. With the HS non adjustable's, the stock covers will work just fine. Be sure to remove the factory guideplates and toss them. Have fun!
|
Woodrow
Dodge Dakota
JOIN HERE
9/23/2006
18:54:23
| RE: Roller rockers
IP: Logged
Message:
Thanks guy's.
Oh,mr google I went to HS's website. I wanted to know if anyone knew where to get them on the cheap. But hey thanks for the info anyway.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
