| From | Message |
dakotamasters
Dodge Dakota
JOIN HERE
9/22/2006
05:14:44
|
 Subject: milled heads
IP: Logged
Message:
anyone know how much to mill the heads on a 3.9l v6 to get optimal performance? need to push over 300 hp. im in the high 200's now.
|
daddio
Dodge Dakota
JOIN HERE
9/22/2006
08:57:29
| RE: milled heads
IP: Logged
Message:
maybe a few more particulars on you motor. are you talking 200/300rwhp or at the crank? if at the wheels you'll be hard pressed to get that NA or without a stroker crank.
personally i'd go with pop-up pistons instead of milling the heads. mill the heads to much and you may have problems getting the intake to fit properly.
|
Fed
GenII
9/24/2006
02:19:16
|  RE: milled heads
IP: Logged
Message:
I am not 100% positive on this but i know its either
.020 or .030
Im leaning towards .020 I cant remember what Larry said
1993 Dakota CC 3.9 auto
(Rebuilt engine, 19 lb. injectors, ignition & wires, 4.10 gears, LSD, exhaust, intake, lowered 5/5, rear anti-sway bar)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
