99Sport
Dodge Dakota
JOIN HERE
3/02/2006
23:58:17
|
 Subject: M1 Installed
IP: Logged
Message:
After "imploding" the beer barrell plenum belly gasket twice within 60,000 miles. I added the M1 intake manifold (P5007852) to a stock 99 Dakota Sport Club Cab; 5.2L 318 4x4, 3.92 5 speed manual.
WOW, should have done this a long time ago. Plenty of low end torque with the manual & 3.92's. Plus now have the ability to pass a car from 40mph to 70. I'm quite sure I could still pull a tree out of the ground, or a 2006 Tacoma or Tundra axle if needed.
Future Mods?
K&N FIPK
Gibson Catback
Hypertech Power Programmer
180 Prestone Stat (755-180) formerly Robertshaw http://www.partsamerica.com/ProductDetail.aspx?mfrcode=PST&mfrpartnumber=755180
Autolite 3923
Headers, Gibson, Mopar, JBA????????????
Any suggestions to maintain low end torque due to the M1 mid to high range? Not really wanting to change RR's, Cams, or to 4.1 4.56 gears. Just the above with good brands that don't "FLOW" too much. Need backpressure??????
|
