| From | Message |
Glen
Gen III
 
7/10/2001
13:39:00
|
 Subject: ASE Performance Chips
IP: Logged
Message:
Has anyone ever heard of these guys? I was reading in some sport truck mag, and i noticed a quick blurb about them, I guess they are in the 25-30hp range and quite a bit of tourqe. I dont know how they compair to the Jet Chips. I have a stage II now, but if these ASE guys are better i'll definatly consider going with one of thier fancy chips... oh yeah, thier web addy is: http://www.asechips.com/
'01, CC, SLT, 4.7, Auto, 3.55 LS
Gibson single catback. Z-tube.
Jet Chip Stage II. 180 T-Stat. Bosch 4417s.
|
Glen
Gen III
7/10/2001
16:53:16
| RE: ASE Performance Chips
IP: Logged
Message:
Ok, so i just called them. They are running a special till the end of aug. I think he quoted me $449 for a '01 4.7. Kinda steep, but the guy i talked to said that the performance gains are much better than with a jet chip, do to the specific tuning for the engine. I looked a little on the internet for some reviews or peoples comments on them, and couldnt find anything. If these guys are right, and thier chip does kick some a**, its time to ebay the Jet Chip, and get one of these. If anyones got any info or anything on ASE, shoot me an email at glen@groupphotographers.com , or just post here. Thanks in advance.
'01, CC, SLT, 4.7, Auto, 3.55 LS
Gibson single catback. Z-tube.
Jet Chip Stage II. 180 T-Stat. Bosch 4417s.
|
Craig
Dodge Dakota
7/10/2001
18:39:42
|  RE: ASE Performance Chips
IP: Logged
Message:
I would be cautious about their claims. I too have the Jet Chip Stage II and if I remember correctly, they quoted an 18-22 hp increase for the 4.7 liter engine. I think there is a limit as to how much that anyone can advance the timing and still run on 93 octane fuel. I would ask them for the dyno sheet of the before and after and then you can see the whole horsepower curve for yourself. If they don't have this info then I would pass on it. Just my opinion :)
Regards,
Craig
|
Glen
Gen III
7/11/2001
13:12:05
| RE: ASE Performance Chips
IP: Logged
Message:
K... just got another email from them. I think someone needs to give them a call for some dyno sheets...
Dear Sir,
We do have a chip available for your vehicle:'01 Dakota 4.7
Price: $639.00(includes installation) IN STOCK!!
SUMMER SALE PRICE: $449.00
*Performance gains 10% hp and 12% torque.
Top Speed Limiter Removed..
30 day trial guarantee.
48hrs. Shipping turn around.
*It is recommended that the vehicle use Premium Fuel, e.g., 91-93 Octane grade.
If you have any questions please do not hesitate to call or fax.
ALL MAJOR CREDIT CARDS ACCEPTED
Toll Free # (866) ASE FAST (Orders Only Please)
Tel. (714) 632 – 9344
Fax. (714) 632 – 9345
Thank you,
ASE Chips
---------------------------------------------------------
Info ASE Chips
4075 E. La Palma Ave. Suite M
Anaheim, CA 92807
Toll free (866) ASE FAST (ORDER ONLY)
Phone (714) 632 9344
Fax (714) 632 9345
www.asechips.com
'01, CC, SLT, 4.7, Auto, 3.55 LS
Gibson single catback. Z-tube.
Jet Chip Stage II. 180 T-Stat. Bosch 4417s.
|
dakota
Dodge Dakota
7/11/2001
14:55:51
|  RE: ASE Performance Chips
IP: Logged
Message:
Has anyone heard how these aftermarket chips stack up against the "Mopar Performance Computer". I checked with my local dealer, who only advised "we've installed 'em in a few 5.2's and they work good"....
To my knowledge the Mopar Performance Computer isn't yet avail. for the 4.7's...
|
kota on 20s
Dodge Dakota
7/12/2001
02:28:00
| RE: ASE Performance Chips
IP: Logged
Message:
holly $*it that is right down the street from my girlfriends house!! ill try to stop by there tomorrow and get some dyno sheets or info. ill post what i find
Eric 98 dropped on 20s
|
kota on 20s
Dodge Dakota
7/12/2001
02:28:43
| RE: ASE Performance Chips
IP: Logged
Message:
holly $*it that is right down the street from my girlfriends house!! ill try to stop by there tomorrow and get some dyno sheets or info. ill post what i find
Eric 98 dropped on 20s
|
Jim
Dodge Dakota
JOIN HERE
3/07/2002
00:11:27
|  ASE Chip Installation
IP: Logged
Message:
How exactly is the chip installed... do they send you the chip and you snap it on top of your PCM (kind of like those old overdrive chips for 486 computers), or do you have to send the whole board into them and have them put it in?
Thanks!
Jim
|
Muzzy
GenIII
3/07/2002
05:23:38
|  RE: ASE Performance Chips
IP: Logged
Message:
You have to overnight your PCM to them and they install the chip right on the board. They reseal the PCM and ship it back to you. Their price has dropped to $350 for the 2001 4.7L.
2001 EC Dakota 4x4 - 287ci V8 - 5 Speed - 3.92 gears/w Sure Grip
Borla Stainless Steel Headers - IAT Adjuster
Flowmaster Force II Cat Back - Ported TB/Custom Cold Air intake
H&K USC Security System
Coming Soon - head porting/ install HO cams & valve springs
|
ZenDak
Dodge Dakota
JOIN HERE
3/07/2002
07:55:01
| RE: ASE Performance Chips
IP: Logged
Message:
come again?,,,$350
|
Muzzy
GenIII
3/07/2002
10:58:38
| RE: ASE Performance Chips
IP: Logged
Message:
Yes $350. It's right on their web site http://www.asechips.com
-Muzzy
2001 EC Dakota 4x4 - 287ci V8 - 5 Speed - 3.92 gears/w Sure Grip
Borla Stainless Steel Headers - IAT Adjuster
Flowmaster Force II Cat Back - Ported TB/Custom Cold Air intake
H&K USC Security System
Coming Soon - head porting/ install HO cams & valve springs
|
Dakota/cali
Dodge Dakota
JOIN HERE
3/07/2002
11:30:04
| RE: ASE Performance Chips
IP: Logged
Message:
What if you have to take your truck to the dealer ship you cant unplug the chip so will diagnostics still check out right????????
|
ZenDak
Dodge Dakota
JOIN HERE
3/07/2002
12:22:26
| RE: ASE Performance Chips
IP: Logged
Message:
Good point,,,
I wonder if that chip would totally blow your warranty out the window?
|
GlenC
GenIII
3/07/2002
12:44:15
| RE: ASE Performance Chips
IP: Logged
Message:
Heh, im not to worried about my warrenty any more... :)
GlenC
'01, CC, SLT, 4.7, Auto, 3.55 LS
MBRP stainless dual rear exit catback.
Robert Shaw 180 T-Stat. Autolite 3923s
JBA Headers.
Kenne Bell supercharged.
Roadmaster active suspension.
|
MikeD
Dodge Dakota
JOIN HERE
3/07/2002
12:50:43
| RE: ASE Performance Chips
IP: Logged
Message:
Hey Glen...
since U already got the Kenne Bell SC whynot get the Kenne Bell Optimizer II flash? Its only $349 and express mail it to ya the day they get it? They quoate about 25hp gains.
|
GlenC
GenIII
3/07/2002
13:03:18
| RE: ASE Performance Chips
IP: Logged
Message:
Yeah, thats actually what im going to do. Im gonna have them tweak the curves a little bit to better match the S/C too. I've just been holding off cause i have to pay off some of my bills. I inquired about the ASE chip before i got my my S/C. The one thing im worried about with the KB and Leech flashes is, can the dealer overwrite them. That would be a very bad thing, cause if it happened to me, there would be one less dodge dealer in the world... :)
GlenC
'01, CC, SLT, 4.7, Auto, 3.55 LS
MBRP stainless dual rear exit catback.
Robert Shaw 180 T-Stat. Autolite 3923s
JBA Headers.
Kenne Bell supercharged.
Roadmaster active suspension.
|
Mark MacHale
Dodge Dakota
JOIN HERE
3/09/2002
11:17:24
| RE: ASE Performance Chips
IP: Logged
Message:
dyno numbers?
Very interested to gain back some of the loss due to driving at 5,000 feet. Tow a boat over some big passes.
|
TJ Alsbury
Dodge Dakota
JOIN HERE
3/10/2002
20:50:47
| RE: ASE Performance Chips
IP: Logged
Message:
I contacted ASE on friday and asked him the procedure since im in Sandiego i can just drive up there to see him. He said it takes about 4 hours to do. I did ask for dyno runs and tech sheets wich he said were unavailable at the moment so i am waiting on that info first If the Kenne Bell is flashing do they remove the speed limiter i can already top the truck out. Still waiting on that SC mod
TJ
2001 4.7 CC 4X4,
|
conig
Dodge Dakota
JOIN HERE
3/10/2002
21:22:06
| RE: ASE Performance Chips
IP: Logged
Message:
I have the kenne-bell and I can tell you when I put it in,it was like a whole new truck much faster then before. kenne-bell will not remove your speedlimiter if you have the 98mph. I tried everything to get them to take it off.
but the way I saw it plus kenne-bell's incredible turnaround time, plus the fact I probable won't run faster then 98mph in the quarter anytime soon didn't make the others seem worth it.
plus I've never had good experiences with chips.
|
R.L.Stuart
Dodge Dakota
JOIN HERE
3/11/2002
21:57:13
| RE: ASE Performance Chips
IP: Logged
Message:
I have the ASE chip installed and im very happy with it,The speed limiter is removed only in Overdrive,Have yet to hit rev limiter,on the Dyno I have 198RWHP stock was 178RWHP and we never hit it's peak,In third gear the factory speed limiter kicked in.My MPG are up,All I can say is POWER.
|
ole
GenIII
3/12/2002
13:06:12
| RE: ASE Performance Chips
IP: Logged
Message:
R.L Stuart,
THANK YOU FOR POSTING DYNO NUMBERS !!!
(now I think I know what I'll be getting for my birthday)
|
Donald Nall
Dodge Dakota
JOIN HERE
2/01/2003
12:03:04
| RE: ASE Performance Chips
IP: Logged
Message:
for anyone who may be interested in getting a ASE chip cheap I am currently running a group purchase for any ASE chip that allows you to buy then for $275 which is $75 off ASE's price. this is for the 5.9 or 4.7 liter motors. if you are interested please email me back at
donnienall626@aol.com
for more details
|
texaslawdawg
Dodge Dakota
JOIN HERE
2/01/2003
19:00:16
| RE: ASE Performance Chips
IP: Logged
Message:
Does anyone know if this chip can be used on a PCM with a B&G Flash ? I see no gains with the flash and Im considering the ASE.
|
chromeouted
Dodge Dakota
JOIN HERE
2/20/2003
14:25:17
| RE: ASE Performance Chips
IP: Logged
Message:
count me in on the group but when ever so let me know whats up
|
NDakota
Dodge Dakota
JOIN HERE
2/20/2003
15:01:34
| RE: ASE Performance Chips
IP: Logged
Message:
I want in too...does this work for the '99 5.2 Auto 4x4? Thanks guys!
|
2THEXTRM
GenIII
2/20/2003
15:08:09
| RE: ASE Performance Chips
IP: Logged
Message:
I just sent Donald an email regarding the GB to verify some things before I plunk down money. I am highly considering getting my 02 PCM reprogrammed by ASE since noone else seems to offer this service.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
Ian
Dodge Dakota
JOIN HERE
2/20/2003
16:35:52
| RE: ASE Performance Chips
IP: Logged
Message:
I know I while back someone tried out Ase on their 4.7 and it made absolutely no gain on the dyno, did they revise their programming or what?
R.L.-Do you have a rough idea of what kind of mileage you gained, with gas prices skyrocketing the only way I could justify to myself (and my budget) spending the extra dough for 91 octane would be if I got a decent mpg increase.
thanks
|
2THEXTRM
GenIII
2/21/2003
00:32:16
| RE: ASE Performance Chips
IP: Logged
Message:
Well got my response back from Don, "I cancelled the group buy it will no longer be offered"... guess that answer's all my questions I had, not. Well, anyone else with any bright ideas as for custom programming for 01+ Dak 4.7's? thx.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
CThomp
Gen III
2/21/2003
08:28:08
| RE: ASE Performance Chips
IP: Logged
Message:
Check to see if there is a UNICHIP dealer in your area. I've heard they might be able to do something for '01 Daks. It'll possibly be a little pricey though.
|
Chipster
Dodge Dakota
JOIN HERE
2/21/2003
11:33:40
| RE: ASE Performance Chips
IP: Logged
Message:
I've got a Kenne Bell Optimizer ll, dyno'd at
229HP and it's an 2001 Auto.
|
2THEXTRM
GenIII
2/21/2003
12:12:12
| RE: ASE Performance Chips
IP: Logged
Message:
I sent an email to Unichip regarding any dealers near me. Their website really doesn't explain much or give details on performance gains and that is the first I have heard of them before.
I have heard of the Kenne Bell Opt II, but thought it was for those that had KB SC installed, what does the unit do exactly and what's the average price tag? Is it a replacement chip, a stand alone unit like the Jet Chip or a "programmer" like the hypertech's?. Hard to hook-up/install? I prefer to do something that will be custom to my mods to get the most outta them, if I have to spend $500-600 for the right set-up, I will. Thx!
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
| | P 1 Next Page>> |
